Artificial Grass Anchor Pad for Lawn Screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A load-spreading anchor disc designed to secure artificial grass using 3D printed ground screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😉
This model is a heavy-duty anchor disc designed to spread clamping pressure over a larger surface when securing artificial grass/turf to the soil.
It is specifically designed to be used alongside standard 3D printed ground screws (like the Husqvarna/Gardena Automower fixation screws). Instead of the screw head pressing directly on a tiny area of turf, this pad sits on top, holding the lawn flush and flat without ripping or tearing the backing.
Features
Load Distribution: Spreads downward force over a wider area to prevent turf damage.
Low Profile: Sits flush against the synthetic grass for a clean look.
Easy Assembly: Slip your ground screw through the center hole and drive it directly into the dirt.
Material & Print Instructions
Material: PETG is strongly recommended for outdoor durability, weather, and UV resistance.
Infill: 15% – 20% is plenty for this model.
Supports: None needed (prints flat on the bed).