Artificial Grass Anchor Pad for Lawn Screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A load-spreading anchor disc designed to secure artificial grass using 3D printed ground screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🟩 First and foremost: I’ve worked hard on this, so I’d love to see your creations, folks! 🙏😉
This model is a heavy-duty anchor disc designed to spread clamping pressure over a larger surface when securing artificial grass/turf to the soil.
It is specifically designed to be used alongside standard 3D printed ground screws (like the Husqvarna/Gardena Automower fixation screws). Instead of the screw head pressing directly on a tiny area of turf, this pad sits on top, holding the lawn flush and flat without ripping or tearing the backing.
Features
Load Distribution: Spreads downward force over a wider area to prevent turf damage.
Low Profile: Sits flush against the synthetic grass for a clean look.
Easy Assembly: Slip your ground screw through the center hole and drive it directly into the dirt.
Material & Print Instructions
Material: PETG is strongly recommended for outdoor durability, weather, and UV resistance.
Infill: 15% – 20% is plenty for this model.
Supports: None needed (prints flat on the bed).