Carburetor Airbox Boot Suitable for Honda XL350 1977-1978 Centerport 17222-385-700
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement for your cracking and damaged airbox boot. May fit all center ports
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing
This model is almost 1:1, with some adjustments made for printability. I have made other variants to adapt larger carbs, but I figured I would share this one. Originally wanted to make a mold and cast them from urethane, but I have not had time to refine that process.
The bottom portion has a flange just like OEM to ensure good fitment against the air filter element.
If you print this in 95A, it will be stiff and annoying to install, but hopefully you only have to do it once!
When installing, its prudent to add some sealant around the joint, I used Motoseal (3bond/hondabond/etc) does not seem to interact with the TPU and can be removed easily.
I had variants of this installed for months with no problem,
Supports on TPU can be terrible to remove, my recommendation is to add a pause in the slicer at those layers, and color on the top of the TPU with a sharpie or paint marker. This is usually sufficient to reduce layer adhesion and make them removable. Of course if you have multi filament capabilities then there are better solutions.
If you need anything, please reach out. My goal is to help folks.