Counting matching models…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. Update March 13, 2025: A version with a dedicated slot for each tool provided with the…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One. No supports, except for the exhaust pipes. Everything is designed to be simply…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
This remix arranges the eight parts of the Elegoo Centauri Carbon Riser (originally STEP files) into a single print plate for easy printing. The STL file contains the pre-arranged layout. (Note: The STL may import as a single mesh in some…
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
This is a tool tray designed for the Elegoo CC that mounts to the Spool side of the unit. This does Not use magnets but uses two of the CC's side panel screws to mount it. Longer screws are not needed. Note: This is an original design and…
NOT my WORK and NOT a REMIX All credit to @MEsteban77 @ Cults 3D https://cults3d.com/en/users/MEsteban77 I struggled to find a model of Han in Carbonite I was happy with until I found this one on Cults; thus sharing here for this…
EDIT- I've recently purchased some P1S machines and this model works fine on them but I plan on updating the model to work better on them and also incorporate different slots than the original, if you have any specific requests for slot…
Screen Accent for the Elegoo Centauri Carbon.
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
This is a simple dual-bearing spool holder for the Elegoo Centauri and Centauri Carbon. Required hardware 608 bearing, x2 I strongly recommend using greased bearings. The grease provides some resistance which helps to slow down the spool…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
On the new ELEGOO Centauri Carbon's the PTFE tube running into the print head is way too kinked and causes loading and printing issues. If you have one of these machines please snip the small zip tie at the end of the tube guide and…
This is a HEPA filter option for your Elegoo Centauri Carbon 3D Printer There are two print model options for you to work with Is a magnet option that works with 2mm magnets you can easily place it on the back when needed is an option…
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
The model holds all the accessories. It's available in 4 variants. I would recommand printing the variant that uses the integrated screws. This is due to the weight of all the accessories. Model has been updated with better holes for the…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
This is the original Z axis cover for the Bambu Lab X1C ! :) These Z axis covers protect the top F625Z bearings on the threaded Z axis rods in the Bambu X1 and X1 Carbon… The walls are pretty thin… so, you may need to enable “Detect thin…
Current Version (v3) Notes: Changed default model orientation on slicer import to reduce confusion and broken snap fits This model was designed to help reduce instances of purge waste being flung back into the print area. The models I…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
I am space limited due to a shelf above the Centauri and I plan to use it primarily for ABS / ASA prints so I used Prusa Slicer to chop off the vents but retained the angled shelf to add in led light strips. The Centauri Carbon is dark…
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
Poop chute for the Centauri Carbon. The model does not require supports when printing. This poop shoot does not need to be screwed into the back of the machine, so can be easily removed to empty out the tray.
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…
Update Jun 02, 2025: I removed the Printer'n Beer tag that was on the side and put it on the back. So the tag is no longer visible once installed. I added slots for all the tools provided with the Elegoo Centauri Carbon on my base, which…
****UPDATE 2**** I included another STL with the air outlet moved over and away from the poop shoot for those that are enclosing the the poop shoot. ****UPDATE**** ****Please check last pic on where you do NOT glue magnets in as these are…
See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
This is a little slide for the Elegoo Centauri Carbon to move the CC MINI to an easier to access place. Note: the CC MINI model is available separately (from Elegoos website and from the USB stick that comes with the printer). There are 2…
Minimalist top glass riser. PETG. (Overture PETG Black). Nothing special. Just basically used stock settings on Bambu to print this!! :D No supports necessary. Supports 8 or 10mm LED strips that stick to the inner sides. Has a 4.25mm hole…
NEW UPDATE: Behold an improved and raised version! I extended the bellow section to add one more to prevent bottoming out during Ludicrous mode prints Added more thickness to the adapter interface for more high frequency vibration damping…
simply clips on, no modifications or tools required perfect fit PTFE tubing is a friction fit, no extra parts required contains variants for 6mm and 4mm OD tubing can be attached and removed without unloading filament .step files included…
This door holder is specifically designed for the Elegoo Centauri Carbon enclosed 3D printer. It allows you to securely prop the front door open at a fixed 10-degree angle. Purpose Provides slight ventilation for the print chamber when…
A remix of SE3D model. (14Jun26) New folder organization (25May26) Added frontSkeletonCanvas, frontSkeletonCanvasNotFanScrews and frontVCanvas. Need 5x3mm magnet. Three preliminary front covers for Canvas compatibility. The second cover…
This is an update to the provided scraper holder provided by elegoo that allows you to magnetically attach the scraper to your printer. Two options provided one for larger and one for smaller magnets Link to the smaller magnets -…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
A filament dry box that mounts to the side of the Elegoo Centauri carbon based on the design of @NaNO3 which was originally based on @Yanev 's parametric toolbox. I have included versions for the lid that work with or without the addition…
Poop Bucket / Waste Catcher that can be attached to the two screws on the backside Included 3mf files have all the right settings to be used in the ElegooSlicer Printed the smaller version, bigger version also included Partly created…
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
Start + End Gcode for the X1 Carbon that significantly reduces the time to start printing without damaging your build plate, and making sure the nozzle is well primed to give a good first layer. The stock Gcode heats and cools the nozzle…
Have you noticed that the popular GC Video HDMI dongles for the Gamecube sag when a heavy HDMI cable is plugged into it? This simple brace latches onto the Gamecube vents below the Digital Video port and support the dongle from sagging.…
This is a print in place stand for your extra buildplates for your Elegoo Centauri Carbon or Elegoo Centauri 3D Printer that holds the standard 256x256 sized buildplates. Prints in place, no supports needed 10-20 infill .2 layer height 5…
🇬🇧 Description This model has been designed to allow the use of the CANVAS system on the Centauri Carbon 1 , while keeping the printer fully enclosed using the original top glass. The riser lifts the lid to provide clearance for the PTFE…
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
This is the first model I have made or printed myself. I did 3 walls and 15%infill, could probably get away with less. Feel free to remix and make it better. I made this with Tinkercad, so my knowledge is very limited. Added a second…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
Removed the text and added Elegoo Logos
Screen cover for the Elegoo Centauri Carbon, available with or without the Elegoo logo.
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attach a wide filament spool to the side of…
4 Color HueForge model. Han Solo Carbonite filament painting made using Sunlu PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu…
Centauri Carbon First Layer Test to make sure your first layer is up to standard. The 3MF file is already set in the print bed, so you don't need to adjust it.
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
My existing small bin for the rear of my X1 Carbon would fill up and either overflow or back up into the printer. What I wanted is a waste chute to move all purge material to the front of the printer that worked with the anti-vibration…
This spacer helps reinforce the edges of the panel for mounting hinges or providing extra room for an internal spool holder. Recommend knurled heat-set inserts with this spacer unless you select the M3 nut version. If you have never done…
Extension for the top of the poop chute door to help with filament not getting stuck on the top of the door. it just pushes on top of the door , flat side to the front. I was always having problems with the long oozed strand of filament…
Updates: UPDATE! Elegoo has addressed the issue. There's a possible fix, which they have outlined in a reddit post . This post encourages you to go to the following link and request a new cable. I would suggest that people go and do this…
!!! Important !!! : Be careful if you take the bed to the bottom as the bed will skip teeth in the belt because the bed hits the bearing covers. If you want to use this mod you have to change the Printable height parameter in the slicer…
I add borders for a smoother look
Purge Waste Ramp and Collection Bin – Elegoo Centauri Carbon 2 This model consists of a guiding ramp and a collection bin , designed to channel and collect purge waste from the Elegoo Centauri Carbon 2 . The ramp guides purge material…
This is a gasket for the back of the Centauri Carbon where the PTFE Tube enters the back of the case. Hopefully this will prevent premature wear of the PTFE Tube.
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
A simple back hanging waste system for the Centauri Carbon 2. It uses the existing screws to secure it to the machine. It slides off and on easily, and holds a large amount of poop for those long jobs. I could've cut down on the amount of…
I want to thank everyone that contributed to the Nevermore project. It has been a very useful modification to my Voron. The new V6 design offers some nice improvements but I wanted to redesign some of the parts. I remixed the cartridges…
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
I have received a lot of backlash on Reddit, calling this "gooning content", so before anyone calls this “gooning content,” please consider this: X: We must respect women and their bodies! X: You drew a woman with large breasts, you don't…
Creality K1 - Hepa filter housing This design has been created to place a hepa filter on our Creality K1 printer using Xiaomi washable hepa filters Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un…
Centauri Carbonのノズルの左側コネクター取り外しジグです。 This is a jig designed to remove the left-side nozzle connector of the Centauri Carbon.
Now your Dummy 13 can have a semi-functioning pistol instead of a boring old static model! Inspired by the moving pump shotgun concept of my previous model , I made a pistol for D13, but with a functioning slide that moves back and forth!…
This is compatible with the blade that comes with the Elegoo Centauri Carbon. I made this because I didn't have any PLA when I got my Centauri Carbon and they only give you a print file to print the scraper handle in PLA. It printed great…
I used the center oriented screw locked version of the model and removed the Elegoo text and hex background. I replaced it with the elegent Elegoo logo. Hope you all enjoy! Please note I have only remixed one of the models. Below is the…
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
Same as the original model but I extended the middle out to allow for 3KG rolls of filament no supports needed Print in PETG or ASA etc The PTFE tubes are not 100% needed but a nice addition. I superglued mine in place after trimming. 20%…
Centauri Carbonのノズルの右側コネクター取り外しジグです。 ペンチで外せますが専用ジグがあると便利なので作りました。 This is a jig designed to remove the right-side nozzle connector of the Centauri Carbon. I designed this dedicated jig to make the process easier and more convenient.
Noticed a hole in the side of the printer when considering airflow and leakage for stuff like ABS so I made this snap-in plug for it. Printed in SUNLU PLA+ at default settings.
The redesigned version of the original Prusament Clamp for PETG. This lighter version saves material but is still perfectly strong using PETG Carbon Fiber. The remix is designed by Josef Franc ( ropak ).
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
Sliced using Elegoo Slicer 1.1.7.3 Printed in PETG, prints in 4 parts. Used to print CF filaments on the Centauri Carbon. The factory path for the PTFE tube creates tight bends that snap the filament. Removing the tube form the drag chain…
Ce nouveau support bobine est plus long que l'original et vous pouvez placer 2 morceaux de tube PTFE pour faciliter la rotation de la bobine Ce modèle comporte déjà des supports d'impression sur ça la partie supérieur et sont à enlever…
With this handy little tool you can clean your carbon rods even when the lid of your bambu printer is closed. Just put Isopropyl alcohol on the sponges, snap it to your carbon rod and move it back and forth a few times till they are shiny…
The original was slightly modified and the storage compartment was added on top. It is designed to hold various tools, printing plate(s) and stash the glass cover higher when necessary, especially when printing with PLA. This design was…
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
Bambu Lab X1-Carbon X1C Purge Poop Slide - This low-profile slide is specifically designed to fit snugly between your printer and the wall, making the most of the available space on your workspace. Thanks to its magnetic attachment, the…
Enhanced Z rod grease contact bushing caps for the Elegoo Centauri Carbon. These grease cap bushings feature easy application port reciprocals that interface with the stock grease tube originally included with the Centauri Carbon. The…
UPDATE! Elegoo has addressed the issue. There's a possible fix, which they have outlined in a reddit post . This post encourages you to go to the following link and request a new cable. I would suggest that people go and do this at the…
Toorack/toolcaddy for Elegoo Centauri Carbon with 3 x 25x3mm magnets to fix it to printers side. I used auto tree supports on buildplate only. Don't know if they are even needed, but slicer made only 4 minor tree supports so what the…
.Thank you Adam for the Model! I have modified it to bring the support to a position which dosent get in collision with the front bezel. Further the attachment diameter was for my new Bambu X1 Carbon (03/2023) too small and increased the…
This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.
