PCB Replacement Button Holder for Gaggimate Delonghi Linea Classic EM450.M
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These spacers allow for standard 12mm buttons or switches to be used instead of the stock PCB
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ This print is for an application that involves mains voltage. Make sure there are no exposed wires and take the necessary precautions! Be aware that there is a risk of electrocution or fire. ⚠
These are mounting brackets with different heights for fitting standard 12mm round buttons or switches into the stock locations of the DeLonghi Linea Classic (aka EM450.M).
The taller version is better for buttons, to bring them forward enough to be flush with the front panel.
The less tall version is designed to be used for switches, as I prefer those to be recessed a little. This way the fastening nut is also flush with the front panel.
I designed this for the Gaggimate conversion of my Linea Classic, which i wanted to keep as stock-looking as possible. As the original buttons are soldered onto the machines mainboard, they weren't easily reusable for my usecase, which is why I opted to retrofit readily available standard parts instead.
Some notes about the design and printing:
There are tabs which fit into the original LED slots, to prevent the switches from rotating.
The switches washer needs to be placed right onto the switch body with the "rotation prevention tab" facing towards the front. Then place the printed part onto it and finally the nut.
The parts are already oriented as they're intended to be printed. Use supports for the rim to get a "sharp" edge, for the tabs of the front mounting plate to hold onto.
Feel free to reach out if there's any questions and consider joining the Official Gaggimate Discord Channel!
Also, please check out my other Gaggimate-related designs, if you're interested.