Worker 10rd Talon Magazine Sleeve for Ontos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cosmetic sleeve for a 10rd worker talon mag designed for the Ontos blaster
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 10
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I wanted a chunky sleeve for my straight talon magazines that contributed a little more to the theme of the Ontos. These are definitely chunky, but the heft allowed me to add a little curve to them which is cool, and on a 10rd mag it meshes up against the magwell nicely.
The insert is separate so I could print it in a separate colour and glue them in place, but you could also leave it out if you wanted the window. I included a cutaway to allow the mag release lever to depress fully and there's a recessed hole for an M3 socket cap bolt underneath to secure the magazine in place if you were to drill a small hole in the base. Jamming a very thin shim down the side would probably be enough to avoid the bolt - I've used a strip of thin resistance band material and it works great.
I've included files where the "grip" sections on the front/back are separate in case someone finds that useful