ExoBass - Wing Sets - VaiTality
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed bass part — full catalog, build planner, and assembly guides at https://exobass.com
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com
Plan Your Build & Get Hardware
ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.
You can find this specific part, ExoBass - Wing Sets - VaiTality, on our site.
Step 1: Insert Heat Set Inserts

Step 2: Screw Front of WingSet to Center of WingSet

Step 3: Attach Potentiometers

Step 4: Attach Jack

Step 5: Do the wiring
After this step it won't be as easy to get to the electronics, so wire it now
ℹ️ Make sure to run a wire for the pickup through this hole!
Step 6: Attach Back

Step 7: Attach ExoBass Core

Hardware
DIY Kit
You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.57 plus shipping.
Self Source
If you want to order the parts yourself, here's a list. Estimated cost: $75.06.
