1 / 8
ExoBass - Wing Sets - VaiTality — zdjęcie 1
1 / 8

ExoBass - Wing Sets - VaiTality

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printed bass part — full catalog, build planner, and assembly guides at https://exobass.com

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Part of the ExoBass project — full catalog, build planner, and assembly guides at https://exobass.com

Plan Your Build & Get Hardware

ExoBass can be confusing! Head over to our build planner to plan your entire build - it'll walk you through every available part and handle compatibility along the way, and it covers all ExoBass parts. It's also the best way to get hardware, since it lets you buy everything for a full build in one go, not just this part.

You can find this specific part, ExoBass - Wing Sets - VaiTality, on our site.

Step 1: Insert Heat Set Inserts

Step 2: Screw Front of WingSet to Center of WingSet

Step 3: Attach Potentiometers

Step 4: Attach Jack

Step 5: Do the wiring

After this step it won't be as easy to get to the electronics, so wire it now

ℹ️ Make sure to run a wire for the pickup through this hole!

Step 6: Attach Back

Step 7: Attach ExoBass Core

Hardware

DIY Kit

You can order a DIY kit for your entire build from our build planner, the estimate for this part's kit is $8.57 plus shipping.

Self Source

If you want to order the parts yourself, here's a list. Estimated cost: $75.06.

Tagi