Arrma Typhon Grom Skid Plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skid Plates for the Typhon Grom to protect the chassis and screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
We have been racing our Typhon Groms in parking lots and the screws have been talking a beating! If you have ever tried to remove a screw from the bottom of a chassis that has been ground down, you know what I'm trying to avoid.
I tried the metal skids from Amazon, but the screw locations were off and the screws were still taking a lot of wear.
I designed these skids to have extra depth to protect the screws. Since they are printed with about 20 cents of material, I plan on replacing them often.
The front skid location does have a slight bend, so I suggest putting the two screws in the front, heating the skid plate with a heat gun or torch, then gently bending it back to put the two rear screws in.
I suggest at least 6 walls and 100% infill for strength. They are small parts and should be around 9g in filament.