LayersFactory
Report model
1 / 4
Cylinderical Dessicant Holder — image 1
1 / 4

Cylinderical Dessicant Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

StandardParts

@dskrip_2183463

Dessicant holder with a 30mm thread cap, and a Fusion360 parameterized body.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
57
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (2)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (4)Related

================================================

FEATURES:

  1. The default .stp object is 40mm in diameter and 126.44mm long, with M30x3.5 threads.

RECOMMENDED PRINT  SETTINGS:

  1. Orientation: The recommended orientation is for the cap top lay on the print bed, and the containers bottom lay on the print bed, as shown in the slicer photo.

  2. Brim: It is highly recommended to add a good outer brim to the container.

RECOMMENDED PRINT MATERIALS:

  1. PLA or stronger. Of course with PETG, be careful of tipping the body with potential blob buildup on the nozzle when printing tall objects.

OTHER PARTS LISTS:

  1. Dessicant, of course :)

INSTRUCTIONS:

  1. There are four parameters to change in Fusion360:

    1. Length: changes body length.

    2.  Diameter: Changes body diameter.

    3. EmbossCount1: Changes the quantity of the 'first' set of perforations in the Z axis.

    4. EmbossCount2: Changes the quantity of the 'second' set of perforations in the Z axis.

NOTES:

  1. It is recommended not to go with a diameter smaller than 40mm since the cap size is static.

  2. Please note that no matter the diameter of the body, there will always be the same amount of perforations in any given 'row'. If you need more perforations, it is recommended to increase the length of the body instead.

  3. There is potential for loose overhangs inside the cylinder container when printing with the recommended orientation depending on the diameter. I have'nt tested it, but you can also flip the cylinder to print 'bottom up', then paint supports inside the cylinder.

I am always willing to upload different size combinations for people not wanting to use the parameterized file and instead just wanting an .stp file. Just leave a comment or message on what size you like and I can add it!

===================================================

Tags

dryerdessicantfilamentstoragefilamentdryerfilamentdrybox