LayersFactory
Zgłoś model
1 / 4
Cylinderical Dessicant Holder — zdjęcie 1
1 / 4

Cylinderical Dessicant Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

StandardParts

@dskrip_2183463

Dessicant holder with a 30mm thread cap, and a Fusion360 parameterized body.

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)Powiązane

================================================

FEATURES:

  1. The default .stp object is 40mm in diameter and 126.44mm long, with M30x3.5 threads.

RECOMMENDED PRINT  SETTINGS:

  1. Orientation: The recommended orientation is for the cap top lay on the print bed, and the containers bottom lay on the print bed, as shown in the slicer photo.

  2. Brim: It is highly recommended to add a good outer brim to the container.

RECOMMENDED PRINT MATERIALS:

  1. PLA or stronger. Of course with PETG, be careful of tipping the body with potential blob buildup on the nozzle when printing tall objects.

OTHER PARTS LISTS:

  1. Dessicant, of course :)

INSTRUCTIONS:

  1. There are four parameters to change in Fusion360:

    1. Length: changes body length.

    2.  Diameter: Changes body diameter.

    3. EmbossCount1: Changes the quantity of the 'first' set of perforations in the Z axis.

    4. EmbossCount2: Changes the quantity of the 'second' set of perforations in the Z axis.

NOTES:

  1. It is recommended not to go with a diameter smaller than 40mm since the cap size is static.

  2. Please note that no matter the diameter of the body, there will always be the same amount of perforations in any given 'row'. If you need more perforations, it is recommended to increase the length of the body instead.

  3. There is potential for loose overhangs inside the cylinder container when printing with the recommended orientation depending on the diameter. I have'nt tested it, but you can also flip the cylinder to print 'bottom up', then paint supports inside the cylinder.

I am always willing to upload different size combinations for people not wanting to use the parameterized file and instead just wanting an .stp file. Just leave a comment or message on what size you like and I can add it!

===================================================

Tagi

dryerdessicantfilamentstoragefilamentdryerfilamentdrybox