Pouzdro pro kulatý waveshare 2.1" displej s ESP32-S3 / Stand for round waveshare 2.1" display with ESP32-S3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pouzdro/Stojan pro kulatý waveshare 2.1" displej s ESP32-S3 / Case/Stand for round waveshare 2.1" display with ESP32-S3
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 358
- Makes
- 6
- Views
- 1,558
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pouzdro (stojan) pro kulatý Waveshare 2.1" displej s ESP32-S3
Tento model mi poslal Radek B. na facebook chiptron.cz - mnohokrát mu za tento model děkuji.
Najdete tady dvě verze pouzdra pro kulatý displej Waveshare 2.1" s ESP32-S3.
- původní (Stojan_waveshare2_1_ESP32-S3)
- s otvory pro USB-C kabel pro oba USB-C konektory (Stojan_waveshare2_1_ESP32-S3+kabel)
Displej se tiskne na stranu displeje s podporami.
3 perimetry
PLA nebo PETG
Podpory ON
Vrchní kontaktní vrstvy - 2 vrstvy
Stojan byl vytvořen pro projekt MeteoPlaneRadaru (meteoradar + letadla) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, použít jej samozřejmě můžete jak chcete.
Verzi pro 2,8" displej najdete na https://www.printables.com/model/1841805-pouzdro-pro-kulaty-waveshare-28-displej-s-esp32-s3
Case (stand) for round Waveshare 2.1" display with ESP32-S3
This model was sent to me by Radek B. on facebook chiptron.cz - I thank him many times for this model.
Here you will find two versions of the case for round Waveshare 2.1" display with ESP32-S3.
- original (Stojan_waveshare2_1_ESP32-S3)
- with holes for USB-C cable for both USB-C connectors (Stojan__waveshare_2_1_ESP32-S3+kabel)
The display is printed on the side of the display with supports.
3 perimeters
PLA or PETG
Supports ON
Top contact layers - 2 layers
The stand was created for the MeteoPlaneRadar project (meteoradar + aircraft) https://chiptron.cz/meteoradar-a-radar-letadel-na-jednom-kulatem-displeji/, of course you can use it however you want.
The stand for 2.8" display you may find on https://www.printables.com/model/1841805-pouzdro-pro-kulaty-waveshare-28-displej-s-esp32-s3