1 / 4
AOOSTAR WTR Pro Front Panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative hex front panel for Aoostar WTR Pro with magnet slots. Much better ventilation.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 1
- Views
- 131
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Designed for 5x2 mm neodymium magnets. Each corner has two magnet slots.
In your slicer, pause the print at the first layer that covers the magnet holes and insert magnets. At that point, the magnet slot height should be 2.2 mm.
With a 0.2 mm layer height, you should pause at layer 26.