1 / 3
Tamagotchi Paradise UART Adapter Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for CH340G adapter.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 53
- Makes
- 1
- Views
- 397
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this adapter, you can send gifts and other data to a Tamagotchi Paradise. The adapter uses the CH340G Yellow variant, it's important to set it to 3.3 V mode!
Case needs some supports, I recommend printing with PETG. PLA is too brittle for the connector.
BOM
4x M2 Bolts 6mm
4x M2 Heat set inserts OD 3.2mm (Not needed if you print "case_no_heatset" version)
Nickel Strip 0.1x4x100mm
CH340G Yellow
2x Female to Female Dupont wires
There are several different programs you can use:
https://ko-fi.com/s/1414b5336f