Gramophone Trinket Box + Matching Charm — Victrola Horn Phonograph
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A horn-gramophone trinket box with a front-loading drawer hidden in the cabinet, plus the same phonograph shrunk into a
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
A wind-up horn gramophone that opens. The cabinet under the horn hides a front-loading drawer — pull the knob and it slides straight out. Rings, guitar picks, SD cards, pills, one very small secret. The horn, tonearm and record deck stay solid and permanent; only the drawer moves.

And the same gramophone shrunk down to wear. The charm is the identical phonograph at earring scale with a jump-ring bail fused into the horn rim, so the box and the earring read as a matched set.

What's in the download
File | What it is | Size |
| Gramophone body with the drawer pocket | 54 × 52 × 66 mm |
| Slide-in drawer, styled faceplate + knob | 23 × 26 × 12 mm |
| Wearable charm with bail | 25 × 24 × 34 mm |

Assembly: none. Print the two box parts, slide the drawer in. For the charm, thread a jump ring through the bail and hang it from an ear wire or a chain. No supports, no glue, no hardware.
Print notes
Both parts print cabinet-down, flat on the bed — no supports anywhere.
The drawer is modelled with a running clearance; print it in the same material as the body so the fit lands where it was tuned.
0.2 mm layers are fine on the box. Drop to 0.12 mm for the charm — at 34 mm tall, the horn scallops and the tonearm are near the limit of what a 0.4 mm nozzle resolves, and coarse layers blob the horn lip.
The tonearm foot is the fragile spot on the charm. It is welded into the cabinet back wall with a tapered neck and a buttress fin (the first print snapped there before the weld). Don't scale the charm down.
Any filament. PLA is fine; the photo is PLA.

The .scad is attached, and it drives both wear formats plus a 1.35× pendant scale.
