EU Outlet Adapter & Spacer for Wobbly Plugs (Schuko Fix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a custom-designed 3D-printed spacer/skirt that clips directly onto standard EU/Schuko plugs.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a custom-designed 3D-printed spacer/skirt that clips directly onto standard EU/Schuko plugs. It fills the empty gap inside deep-set wall outlets, completely eliminating wobble and ensuring a snug, safe, and stable connection.
It is designed to be pushed onto the plug carcass once and stay there, acting as a supportive collar when plugged in.
Features:
Perfect Fit: Specifically tailored to match standard round EU outlet dimensions with tight tolerances.
Anti-Wobble Design: Prevents heavy blocks or loose cables from sagging or unplugging themselves.
Easy to Print: Can be printed flat on the bed without any supports.
3D Printing Settings & Recommendations:
Material: DO NOT use PLA. Since this goes near electrical contacts and potential heat, it is highly recommended to print this in PETG, ABS, or ASA for proper thermal resistance and durability.
Perimeters/Walls: At least 4 walls (approx. 1.6–2mm wall thickness) to ensure the outer ring doesn't crack under friction.
Infill: 20–30% (Grid or Gyroid).
Supports: None needed.
Print Orientation: Place it flat side down on the build plate.
