1 / 3
Parametric Vents Flaps for Core One L with 100mm (4 inch) Round Duct Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of vent flaps which adds a smooth loft transition to 100mm (4 inch) round ducting for external exhaust.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Vents Flaps for Core One L with 100mm (4 inch) Round Duct Adapter
100mm outer diameter. 4 inch ducting will fit slightly loose but a hose clamp will tighten it right down.
Print vent flaps from original model to reduce back drafts from the outdoors.
Print Settings
I experienced slight warping. Adding a brim around the model may help reduce this.
PETG or higher temp resistance material. PLA will work just fine if you never print anything that needs a high chamber temp.
No supports
0.2mm layer height
15% infill