1 / 2
Orange Pi Zero snap-fit slim case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Orange Pi Zero snap-fit slim case with hex pattern cooling holes, antenna mount and cutouts for both GPIO and UART pins
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Case for the OrangePi Zero SBC. Contains a friction fit hole for the antenna. Cutouts for both GPIO headers and UART pins. Hexagon pattern holes over the CPU for better airflow. Doesn't need any additional hardware or tools to assemble.
Print from PLA or PETG with 0.13-0.15 mm layer height. No supports needed.
Tested with original Orange Pi Zero, should also work with LTS but if you have any issues with it, let me know.