Emoji Reaction Die — a mood d6 that replaces the RPG reaction roll
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One 18 mm d6 with six emoji faces on a HOSTILE → HELPFUL ladder. Roll it when the party meets an NPC and read the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Old-school RPGs settle "how does this monster react to you?" with a 2d6 roll and a lookup table. This is that table as one die you just read.
Six faces, six attitudes, worst → best:
😠 hostile · 😒 unfriendly · 😐 neutral · 🤨 uncertain · 🙂 friendly · 😄 helpful
Roll it the moment the party meets someone, look at the top face, and play the NPC. No chart, no addition, no remembering which end of 2–12 is good.
Opposite faces are opposite attitudes, the way a real reaction spread works: hostile ↔ helpful, unfriendly ↔ friendly, neutral ↔ uncertain. Each face is spun so it reads upright when it lands on top.
18 mm rounded cube, 2.6 mm corner radius — the same size and feel as a normal d6, so it rolls properly and lives in the same dice bag.
Three face styles, one ladder
Style | File | Look |
geometric |
| Faces built from pure shapes — dots, brow bars, arc mouths. Boldest, best at small sizes. |
glyph |
| Noto Emoji outlines — the familiar "emoji token" look, circle and all. |
cartoon |
| Inked cartoon faces with a hand-drawn line weight. |
They are interchangeable — print whichever you like, or one of each. The photos show the glyph die (cyan/green) and the cartoon die (blue/red).
Two colours or one — your call
Every style ships twice:
*_combined.stl— two named solids,bodyandemoji. In Bambu Studio: Import → right-click → "Split to Parts", assign a filament to each part. The features sit flush with the surface, so the die stays smooth. Do not use "Add Part" — the two solids are coordinate-locked and Add Part re-arranges them.the plain
.stl— the same die fused into one solid with the faces left as 1 mm recesses. Print in one colour and either leave them as engravings or flood them with acrylic paint and wipe the surface clean.
reaction_die_body.stl + reaction_die_emoji.stl are the geometric style split into two loose files, for slicers that cannot split named solids.
Print settings
PLA or PETG, 0.2 mm layers, 3+ walls, 15 % infill or higher — a die wants to feel dense.
No supports, no brim. The face recesses are only 1 mm deep and every face is flat, so it prints happily on any of its six sides.
One die is about 5 g and 25 minutes.
Feature strokes are ~1.2 mm wide: a 0.4 mm nozzle renders them cleanly, and 0.2 mm layers keep the arcs smooth.
Source
The attached .scad is the full parametric source. size scales the whole die (everything else is derived from it), corner_r sets the roundover, engrave_d the inlay depth, and art_mode picks "primitive" / "glyph" / "cartoon". part="body" / "emoji" export the two colours separately. The art/*.svg files are the cartoon faces and are needed only for that style.
