Pixel 10 Pro TPU case with money pocket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU Pixel 10 Pro case with handy money pocket and magsafe cutout.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
TPU Pixel 10 Pro case with handy money pocket and magsafe cutout.
If you use included 3mf project, there is prepared pause, where you insert the insert into pocket. For MMU you can probably print it with MMU as well. For insert I used PETG, for case I used GIANTARM Transparent Red TPU (https://www.amazon.de/-/en/dp/B0CCY5SB7T)
On picture you can see how to place the insert, I did not used any glue or tape, I just placed it and slightly pushed into TPU. Once printed I separated both layers using toothpick (careful not to puncture TPU case).
Use organic supports on build plate only.