Modular 19 Inch rack mounting system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular mounting for Dell 7090 MFF PC and power packs
- Rating
- 0 / 5
- Likes
- 83
- Downloads
- 259
- Makes
- 0
- Views
- 5,514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
I had the need to mount some Dell 7090 Micro Form Factor PC's in a rack. So I designed this modular mount, which allows them to be mounted, and to store the power packs to be sides of the units. It also has a spot to mount a power board. These are all held together with the ~8mm pins of various lengths.
These all fit nicely within a 19" rack. I've mounted these with RackStuds - but I am working on a potential 3D printed mounting system, to avoid the use of cagenuts.
The Powerboard used is a HPM R105 - https://www.amazon.com.au/R105-Power-Board-HPM-Fitting/dp/B0786Y5K5W/ref=sr_1_8?crid=1AB2ZEIVOI4HX&keywords=HPM+power+board&qid=1651055591&sprefix=hpm+power+boar%2Caps%2C235&sr=8-8
All parts were printed with 6 perimeters, and 15% infill. All a parts are printed ‘face down’, partly so that I'd get the texture from the textured plate, but this is also the optimised orientation to print everything support-free.
The 6 perimeters are what I'd recommend, as it tends to make the parts the strongest.
The pins can be printed standing up - I printed them with 3 perimeters and no top/bottom/infill. This made them easy to press-fit, but you may need to adjust the scale +/- 1% depending on your printers tolerances.
Fusion360 file has been included - so feel free to remix this to suit different devices.