1 / 4
Shelf mounted PTFE/teflon tube holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small mount for a PTFE tube. Enables me to guide the filament through a teflon tube to the printer.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small mount for a PTFE tube.
Enables me to guide the filament through a teflon tube to the printer. Fits standard Norwegian shelf boards ("hobbyplank"), which is 18mm thick. I use some pieces of tape to shim it to make it really snug. I usually place something over the filament roll, to prevent it from collecting dust. This mount makes it a lot easier to handle.
The hole for the PTFE tube might need to be drilled out to 4mm, it will probably be a little too tight (at least it was on my printer).