Snoozing Dragon, Print in Place Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully articulated, print in place dragon fidget. No supports, no assembly needed. AMS or single colour options
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 151
- Makes
- 1
- Views
- 288
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
Meet your new snoozing dragon, a fully articulated, print in place model that curls, wiggles and flexes right off the bed with zero assembly. Its jointed spine bends in every direction, while chunky horns and a spiky ridge running down its back give it heaps of character. It's a satisfying, low effort print that works just as well as a desk fidget as it does a shelf piece, and makes a genuinely fun gift for anyone who likes dragons or fidget prints.
No glue, no pins, just print and play. Run it in AMS for a two tone body with contrasting white horns and spikes, or keep things simple with a single colour for a quicker, no fuss print. Once it's off the bed, give the joints a gentle wiggle to loosen them up. Try posing it curled up asleep, mid crawl, or draped over a monitor edge, and feel free to share your colour combos, we love seeing what people come up with.
Filament Colour & Material
PLA is the easiest choice here and gives the cleanest print in place joints with minimal cleanup. For AMS, a warm orange body with crisp white horns and spikes looks fantastic (as shown), or go bold with a single colour print in something like hot pink or matte black.
Print Settings
Print in place, no supports needed
Layer height: 0.16mm
Infill: 15%
Walls: 2+ line count
Line width: 0.6mm (default, initial, and outer walls)
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: