Snoozing Dragon, Print in Place Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully articulated, print in place dragon fidget. No supports, no assembly needed. AMS or single colour options
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 288
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Meet your new snoozing dragon, a fully articulated, print in place model that curls, wiggles and flexes right off the bed with zero assembly. Its jointed spine bends in every direction, while chunky horns and a spiky ridge running down its back give it heaps of character. It's a satisfying, low effort print that works just as well as a desk fidget as it does a shelf piece, and makes a genuinely fun gift for anyone who likes dragons or fidget prints.
No glue, no pins, just print and play. Run it in AMS for a two tone body with contrasting white horns and spikes, or keep things simple with a single colour for a quicker, no fuss print. Once it's off the bed, give the joints a gentle wiggle to loosen them up. Try posing it curled up asleep, mid crawl, or draped over a monitor edge, and feel free to share your colour combos, we love seeing what people come up with.
Filament Colour & Material
PLA is the easiest choice here and gives the cleanest print in place joints with minimal cleanup. For AMS, a warm orange body with crisp white horns and spikes looks fantastic (as shown), or go bold with a single colour print in something like hot pink or matte black.
Print Settings
Print in place, no supports needed
Layer height: 0.16mm
Infill: 15%
Walls: 2+ line count
Line width: 0.6mm (default, initial, and outer walls)
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: