DryFlow Filament Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dry, smooth, reliable filament feeding with a compact holder and integrated desiccant chamber.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I printed this because I needed something to hold my filament, reduce humidity, and feed the filament at the same time. So, I came up with this. It was designed to sit on the same table next to the printer. I only tested it with 1kg spools, but there is about 20-25mm of clearance above the spool until it hits the lid, so you could probably put one in there. I also added magnet inserts on the back, and happy to accommodate for anyone with different magnets on hand. I also added a gromet insert, a ¼", 6.35mm gromet, but I didn't end up using it because the tether was smoother without it. I also designed this to have a 1mm thick by about 2mm TPU gasket, but I think its airtight enough. If you want to do that, also added that part. comment any recommendations or opinions.