1 / 4
Mountable Case for Hosyond 3.5 Inch Display (CYD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mountable case is designed specifically for the Hosyond 3.5 inch ESP32 Display.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed specifically for the Hosyond 3.5 inch ESP32 Display.
The case uses 4 M3 × 12 mm screws to hold the display in place and close the case.
The case can mount to a wall if desired. There is a cutout for the USB-C connector and the SD Card.
Supports are recommended. The supports are very small as they are only used for the screw holes on the flat back section. Insert an M3 screw in the screw holes in the opposite direction to push the supports out.