GR86/BRZ Tissue Box Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tissue box holder for 2022+ GR86 and BRZ.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tissue box holder for 2022+ GR86 and BRZ.
Mounts behind the center console using ¾" wide adhesive Velcro.
Fits tissue boxes of up to 9" by 4.5" (standard size in North America).
Also features hooks on the inside of the box so that you can hang a bag for garbage.
PLA is not recommended as the interior of a car can reach temperatures that will cause warping/deformation. PETG, ABS, or other higher temperature materials are recommended.
The holder is split into two haves to be printed upside-down. The parts have tight clearances (0.1mm) so that they can be attached together without glue. You may want to print one piece, and then print only a bit of the second one so that you can figure out if your printer's tolerances will work, or if you'll need to adjust the size slightly.
The step file has also been included if you need/want to make any changes.