Counting matching models…
Summary This is a model of a Subaru BRZ (similar to the Toyota GT86) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of…
Very detailed model provided by MAX_MR_ of the 2014 Subaru BRZ. This model features interior details such as seat, steering wheel, vents, and cup holder! Original model likely requires some manipulation to print as the outer body is a…
The rear wing model features a sleek and aggressive design that complements the sporty lines of the Toyota GR86 and Subaru BRZ. It follows the shape of the car's body, providing a seamless integration with the overall design. The wing is…
This is a small storage tray that is meant to sit in the empty space above the gearshift in a 2022/2023 Subaru BRZ and (possibly) Toyota 86 (assuming the interiors are the same). It is meant to add a small amount of storage for something…
1:28 Subaru BRZ; Mini-Z compatible I have remixed and put together this rc kit for a Subaru BRZ, along with an assembly video. Hopefully this will translate to an enjoyable print and assembly experience. Hardware Recommendations The build…
I wanted a handle to grab for trunk lid closure that I could grab from any side and angle, so here's my solution. I printed with 45% infill on FFF (on a TAZ 6) and will do a 100% infill SLA print later (Formlabs Form 3). Weak point is the…
Anyone that has owned a BRZ, FRS, or GT86 knows that these cars aren't known for the most convenient interior design. I've always been annoyed by the lack of places to put my phone while using Maps. This was the product of my annoyance.…
I have designed this 20mm pedal spacer and new pedal stop to simplify heel and toe with a Toyota GT86 / GR86 / BRZ. Just contact me for further details or if you need a print. You need M6x30 bolts / nuts.
Designed to accommodate multiple fuse taps while maintaining OEM cap functionality. Prevents the need to remove or reprint fuse box information. Secure snap-fit design allows easy removal if needed. Print Instructions & Recommendations:…
I've used the design ezeckner shared for a while now, and I like it. However, I clearly go to the drive thru more often than ezeckner, and I started having issues only having the one cup holder. Design Goal The idea was to extend the…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Details This print consists of 3 parts: A left bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A right bracket to mount the Pioneer SPH-DA360DAB to the Toyota GT86 Subaru BRZ A Fascia to fill left, right, bottom…
Proporczyk Górnika Zabrze Górnik Zabrze pennant - Polish football team
This is an adapter to enable an owner of a 2017 BRZ/FRS/86 sports car to be able to pressure bleed their brake system from the master cylinder. There are several pressure bleeder bottle kits available, or just use an air compressor with…
Simple Single Cup holder (75mm diameter) for my 2016 Subaru BRZ
ABOUT THIS MODEL: 2022 Subaru BRZ Fog Light Brackets for Diode Dynamics SS2 SAE Fog Lights After 2 months of development and 5 revisions of this design, I now have the “final” revision printed and mounted on my 2022 Subaru BRZ (as of this…
A simple Phone holder for my 2014 Subaru BRZ. Hole in bottom for speaker. model can be moved back and forth so the dials are still accessible (Made for Google Pixel 6, Pixel Fold, Pixel 9, Pixel 9 Pro Fold) Added image and .step files…
Modeled by trial and error. Fitment will be slightly off so shape it with sandpaper. Print face down and use supports. I used ABS+ to prevent warping on a hot summer day. Used body filler to fill the imperfections before painting. The…
This was my first attempt at creating a flat 3d model from a reference photo. It was printed in polymaker yellow PETG.
This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 6.5" speakers are all different and they will just do whatever mounting size they choose, print…
Inspired by this video . Fit phone holders that are compatible with 17mm mounting pedestals. Directly stick the flat plane to the inside edge of the console with multipurpose mounting tape.
🎁 FREE STL FILE! 2D Subaru BRZ Project for 3D Printing 🚗💨 Introducing the flat (2D) version of the iconic Subaru BRZ ! Get the file for free and print your own sleek, minimalist car decor. This is the perfect, quick project for any Subaru…
Eventually, your visor mount will break and Toyota/Subaru will charge you $80+ to replace the entire visor assembly. Print this in a high strength and high temperature resistant filament like ASA or PC for a tiny fraction of the cost.…
Intake snorkel for 2022 Subaru BRZ. May need sanding to fit snuggly. Heating and massaging the stock airbox is another option to make it fit(this is what I did). I recommend PETG for its higher HDT so it doesn't flex during hot days. I…
---------------EN--------------- Drawstring Brake with 5mm holes. Just print it, insert spring from ballpoint and press it together (need some force). It is designed for spring length 5mm when fully pressed. I used it for my mask, but be…
Adaptor to fit slimline license plates without overhang from the original cradle. Print 2, and mirror the second one Ideally printed in ABS at least 3 shells, 100% infill, oven annealed. Not sure if it fits BRZ/FRS but it is small enough…
Screw cover to prevent the allen head from rusting away, need to grease it first. M12x1.25 designed for GT86/BRZ/FRS. Printed in PETG without supports.
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
A remixed mount for the GT86, BRZ or FR-S with Keyless start.
I took inspiration from @kyushaspeed, but i made it from scratch in a different size and to specifically fit the reverse lockout in my gt86. It's made with m12x1.25 threads but you can use a different insert to fit other cars, just change…
I designed this mount to hold the EDFC controller from tein. you will need 3 small screws to mount it to the dash. Designed to print with no supports. Slanted model angles the controller to be more level for the gyro. To install simply…
Why? KW and RCE coilovers composite lower spring perch and use a steel set screw to keep them in place. The problem is it's easy to strip the threads in the perch since the composite material is much softer than the steel set screw. Some…
This is version one of an air intake inlet tube for a 2022+ Subaru BRZ or Toyota GR86. This replaces the stock, stiff rubber unit. This new piece used a drawn out curve to try and improve airflow. Unfortunately, after CFD analysis of both…
Clutch discs have to be centered in the pressure plate when you mount up the clutchpack. This tool allows you to center your clutch disc easily by inserting it into the clutch disc, then inserting the tool nose into the flywheel bearing.…
Remove dust boot clamp, install at inner tierod end mount point, and remount boot. Do not use zip ties to secure boot, that will not work, I used these clamps. Size thickness as needed, default is 5mm. Used for when you need to avoid…
This is a custom single cup holder replacement for the OEM 2-cup holder for the Subaru BRZ, Scion FR-S and Toyota GT86. Print this in ABS so it can withstand the extra heat while parked outside in the sun. It's designed with a larger…
three variants: magnes , with hang and without hang
Hi there! Own a GR86 or Subaru BRZ and have come to the realization, like so many of us, that there's next to nowhere to throw your trusty Baofeng or TIDRadio walkie-talkie on your car club events? Heading to Tail of the Dragon with a…
Just mirror model for the left side I don't know how no one has done this yet but here I am making it lol, has exact dimension as the OEM version making it fit perfectly in the OEM grill hole location I made mine out of PET-CF I recommend…
Víčko nádržky brzdové kapaliny KIA SEED s logem KIA GT
Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT Nejlepší tisk s filamentem TPU 95A 1 kg Black / Best print with TPU 95A 1 kg Black filament
Recommend printing with ABS/ASA/PC or other high temp filaments. Please do not use PLA. Use support for the bolt hole. I printed with ASA and used PETG for support. Works with first and second gen GR86/86/BRZ/FRZ.
It's really the BRZ cookie cutter because we all know it's better.
Určené k přilepení např. oboustrannou páskou.
Detailed Description If you own a Toyota GR86 or Subaru BRZ , you may have heard a loud crack or pop from the window when opening or closing the door — right when the glass automatically drops slightly. This tiny washer provides just…
Náhradní pastorek brzdy ke kočárku. Brake pad for the stroller.
Printed 2 of these and mounted on the top horizontal brace in the trunk with 3M double sided tape. Purpose isn't to retain the extinguisher but keep it from moving around, extinguisher is held in by zip ties. Something strong enough to…
I liked the design and incorporation of the dash curves from the original. Unfortunately, y TPU print would bounce and shake too much while driving. I tried @oddballghost print and had trouble threading into the TPU without it coming…
Držák pro Zigbee bránu XtendLan BRZ01. Tisk: Materiál: PLA, PetG, ABA, ASA… Perimetry: 2 (tištěno z perimetrů) Vrstvy: 0.2 ---------------------------------------------------- Holder for Zigbee gate XtendLan BRZ01. Print: Material: PLA,…
CZ: brzdička ke šňůrce od spacáku, do brzdičky vložte standardní pružinku z propisovací tužky, ale brzdička se dá na šňůrce zafixovat i pouhým vytažením kloboučku. Tisk: naležato, s podporami jen na desce a s límcem (10 mm) EN: brake to…
This is a plug for the differential of a FRS/BRZ/86/GR86. This is used to plug the hole the axle goes into if you are removing or installing a differential. I used this to test different differentials and remove/install them without…
Sliding door fitting Standard, separate brake KP-Z, eben-tu.cz (eben-kovani.cz) Posuvné kování na dveře Standard, samostatn brzda KP-Z, eben-tu.cz (eben-kovani.cz)
Just a super simple underneath desk mount for the BRZHiFi mini amplifier. There are many mini amplifiers manufactured in China that are the same dimensions, so this mount probably fits many of these also. Requires 4x small screws to mount…
CZ: Náhrada prasklé pružiny brzdy skládací koloběžky JD Bug Deluxe. Po vytištění zasuňte částí s opěrou (širší část ukončující rameno se 2 výstupky) dovnitř do koloběžky, na tenké rameno nasuňte blatníkovou brzdu a propojte původním…
air brake connector cover / kryt konektoru vzduchových brzd
A simple FR-S / BRZ / GT86 60mm gauge, fits the vent on the driver side. Recommended to use some masking tape around the gauge and model in order to make it fit super snug. This models comes in two versions, with or without holes. After…
Wyrazisty emblemat przedstawiający legendarnego Cyklopa – jednookiego olbrzyma z mitologii greckiej, znanego z brutalnej siły i groźnego wyglądu. Projekt w czystym, okrągłym formacie, idealny do: dekoracji ściennych, elementów…
EN --- Replacement of rear wheel parking brake pinion for a strolley Camini Frontera. Modelled with measurements of the original part. For better fit set 101 % in the x and y axis. For precise fit use the small disc as calibration print.…
Pro správné fungování budete potřebovat 2 kovový osy 28mm a 1 19.6mm o průměru 3mm, pryž nebo miralon umístěný mezi osama ve spodní části modelu (pro přítlak patky k podlaze) a gumičku přichycenou vázacím drátkem v horní části modelu.…
Klipsna-Part-down-x - tisk pootočený o 135° Klipsna-Part-up-x - tisk na stojato
Zarážka bovdenu ruční brzdy Škoda Fabia 1
Extensions that allow for the Verus brake cooling kit inlets to be relocated from the fog light housing to the outer grille deflectors. Fits tight enough over the inlet part that nothing else is needed when fully seated. Retains the fog…
Zipline break on 8mm rope/cable
Náhrada brzdy pro dětskou koloběžku (tříkolku). Materiál PETG funguje parádně. Tisknout na raftu.
Reverse lockout cover options to be used with Torque Solution Billet 3" Shifter Extension for BRZ/86/FRS. Made in Tinkercad.
Nahradní "čufl" nad čepem brzdy, který když vypadne během bobování není k nalezení :) Nenašli jsme nádradní díl tak jsme nacrhovali. Sedí v bobech dobře skoro nejde silou vyndat. Doporučuji tisknou na výšku s podporami na obloučku (tak…
Šálka na brzdu motorovej píli Dolmar 7910
Jednoduchá krytka pro překrytí 300mm brzdového kotouče při barvení třmenů. Vytisknout 4 kusy z toho 2 zrcadlit a spojit například lepením nebo jako já za použití pájky a 3D pera. Ihned po nabarvení je možné pootočením kotouče krytky…
Tissue box holder for 2022+ GR86 and BRZ. Mounts behind the center console using ¾" wide adhesive Velcro. Fits tissue boxes of up to 9" by 4.5" (standard size in North America). Also features hooks on the inside of the box so that you can…
This tray replaces the original metal tray in the DCM and has a mount for the GJP/Hachi Electronics DCM Delete Module. You can remove the original circuit board from the DCM tray and replace it with this.
Brzda do vedení pojezdů skříně s posuvnými dveřmi, šířka drážky 6mm(5,5), průřez čtverec. Brzda, nebo zarážka chcete-li se montuje při výrobě. Vsunuje se do vodicí lišty pojezdu. Něco podobného nabízel prodejce za 30 korun kus. Tak sem si…
materiál ASA,ABS,PETG, PA……dle libosti :-) 3 perimetry , 25% výplň po vytisknutí je model lehce smrsknutý, zaleží na zvolení materiálu, ( můj případ z ASA )při nasazování na hřídel jsem použil horkovzdušnou pistol, Nahrál jsem model a…
The best way to print the design is upside down with a little support. The shipping box is optional for durability during transport via mail or freight. Originally I was contacted by a Car Club to print 20 of these and then I sent them…
Show your passion for the Subaru BRZ on the road and beyond! This set contains four universal STL files for 3D printing keychains, allowing you to create the perfect key accessory. The set includes two iconic motifs – the "BRZ" lettering…
Summary This is a model of a Subaru BRZ (similar to the Toyota GT86) in a kit card style. Some characteristic details can be discovered. Equipped with separate exhausts ;-) After printing, the model can be assembled with the help of…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
GR86/GT86/BRZ spare tire lock for trunk. Use a 25mm+ M8 bolt, with some glue. Print with 4 walls, 40%+ infill, no support needed. Use PETG/TPU or stronger filament.
This worked fine with the “slim mount” 6.5" polk db651s I used to replace the stock door speakers. That and a metra harness they work great. 6.5" speakers are all different and they will just do whatever mounting size they choose, print…
One piece reinforced rear speaker mount for the brz and gr86 chassis, should also work with frs and gt86. This was used with some skar audio rpx525s without issue. Mirror print for the other side! I recommend using some foam tape at the…
A remixed mount for the GT86, BRZ or FR-S with Keyless start.
This is a multicolor style BRZ keychain. I did these using a .6 nozzle on a CR10 V3 with ironing enabled. These were really popular at my cars and coffee event so I have decided to release this model on pintables. I was using Hatchbox…
print in ABS or ASA, PLA will not work as it will melt in the heat 2 wall loops, 15% infill 3 bottom layers .24mm layer height
Ive used PLA on a Flashforge Adventurer 5m Pro, but Its currently the winter here so Ill wait to see how it hold up in the Summer. If it doesn't hold up well in the cars interior in the summer, ill try my luck with ABS printing.
nut is optional … not needed dont use supports for smaller holes for cable ties
Subaru BRZ 2024 – 1:4 Scale 3D Print Model This is a high-detail 3D printable model of the 2024 Subaru BRZ, accurately scaled to 1:4. Designed for enthusiasts, collectors, and automotive modelers, this file captures the aggressive styling…
Trunk lid scan of a FRS/BRZ/86. I am working on a wing project and this might be useful to someone else. The scan isn't perfect. In the scan there are two pieces of wood, the vertical board denotes the rear edge of the bumper and the…
This is a rear sway bar for a scion frs, subaru brz, and toyota 86. It is lightweight, easy to adjust, has a super wide adjustment range, and is inexpensive to build. You will need to assemble the parts and then weld them together to make…
This is a tailshaft plug for the Subaru BRZ, Scion FRS, and Toyota 86. You install this in place of the driveshaft when removing the transmission so the fluid won't leak out. Category: Automotive
An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the…
Washer bottle seal for factory filler neck and smaller washer bottle (https://www.amazon.com/dp/B00495UQT2). Will need to drill additional holes in filler neck higher up (but inside the volume of the bottle) so that bottle will fill with…
udělal jsem repliku stop spínače na čz 125/476 175/477 atd tisknuto z pc blend a žádný problém
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concepts This piece of art features a stylized…
Proporczyk klubu Górnik Zabrze do powieszenia na sznureczku lub po przyklejeniu magnesu na lodówce :)
Lightbox z Górnik Zabrze. Przód wykonany z PLA, tył z PETG. polecam wewnątrz ramki wkleić po krawędzi taśmę LED Neutralną. Ja drukowałem z parametrami wysokość warstwy 0.2mm. Aktywne zazębianie materiału w ustawieniach multi koloru.
![BRZ / GR86 Hard Mount [v2] for Walkie-Talkies + AiM Solo2 / Solo2DL](https://media.printables.com/media/prints/c8eeba07-088d-4e70-8150-e9e7335dc6c0/images/11530211_9a23e077-4c1e-4c3b-a6b8-c64bb38785d1_4cb1003a-677e-43e2-99ae-e2d33ca0f54a/pxl_20251227_173657688mp.jpg)
