1 / 3
BRZ/86/FRS steering rack limiter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Steering rack limiter 5mm shim, works for 1st gen twins, may work for 2nd gen as well.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 48
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Remove dust boot clamp, install at inner tierod end mount point, and remount boot. Do not use zip ties to secure boot, that will not work, I used these clamps. Size thickness as needed, default is 5mm. Used for when you need to avoid rubbing at steering lock due to wide wheels.
Will be exposed to grease, so print with a material heat resistive and non-reactive chemically. Printed with 100% infill. Made in Tinkercad.