P
PrintablesJoshH
Scion FRS Silhouette / Wall Art
Cool model for a wall, desk or garage. Smallest I would print this is 200mm wide.
- Downloads
- 349
- Likes
- 69
- Rating
- 5
Search results: frs
Counting matching models…
P
Printablesifrah
Frsky TD R10 mount
mount for your RC plane for Frsky TDR10 receiver receiver : https://s.click.aliexpress.com/e/_Dks9clX
- Downloads
- 295
- Likes
- 10
- Rating
- 5
P
PrintablesS_T_A_R_K_E
FrSky TD R10 mount
FrSky TD R10 mount including 2.4ghz antenna mount. Receiver is mounted to holder using thin tape. holder and antennas secured with zip ties. The original OnShape file for editing can be found here…
- Downloads
- 289
- Likes
- 6
- Rating
- 0
P
Printableshotcupandco
Phone mount for BRZ, GT86, FRS
Anyone that has owned a BRZ, FRS, or GT86 knows that these cars aren't known for the most convenient interior design. I've always been annoyed by the lack of places to put my phone while using Maps. This was the product of my annoyance.…
- Downloads
- 280
- Likes
- 27
- Rating
- 5
P
PrintablesArgo
Toyota GT86 & GR86 / Subaru BRZ / Sciron FRS Pedal Spacer
I have designed this 20mm pedal spacer and new pedal stop to simplify heel and toe with a Toyota GT86 / GR86 / BRZ. Just contact me for further details or if you need a print. You need M6x30 bolts / nuts.
- Downloads
- 271
- Likes
- 29
- Rating
- 4.5
P
Printablespeter.skotte
FrSky Pitot tube Side mount
Simple 2 part enclosure/mount for FrSky pitot tube. The two bottom holes are for bras insert with M3 thread to mount to aircraft surface. Category: Hobby
- Downloads
- 259
- Likes
- 11
- Rating
- 0
P
Printablespetasto
FrSky TD R18 mounting bracket
A bracket to mount the FrSky TD R18 receiver with fixed antenna positions
- Downloads
- 250
- Likes
- 2
- Rating
- 0
P
PrintablesERAVIA
Extended Fuse Box Cap | GT86/BRZ/FRS
Designed to accommodate multiple fuse taps while maintaining OEM cap functionality. Prevents the need to remove or reprint fuse box information. Secure snap-fit design allows easy removal if needed. Print Instructions & Recommendations:…
- Downloads
- 238
- Likes
- 14
- Rating
- 0
P
PrintablesJP Powers
GT86/FRS/BRZ center console organizer REMIX
I've used the design ezeckner shared for a while now, and I like it. However, I clearly go to the drive thru more often than ezeckner, and I started having issues only having the one cup holder. Design Goal The idea was to extend the…
- Downloads
- 229
- Likes
- 37
- Rating
- 5
P
PrintablesDurahl
FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
- Downloads
- 226
- Likes
- 6
- Rating
- 5
P
Printablesps915
FrSky Taranis X-Lite JR TBS Crossfire Adapter
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
- Downloads
- 192
- Likes
- 7
- Rating
- 5
P
PrintablesEuryphasic
Fog Light Brake Duct - Toyota 86/Scion FRS/Subaru BRZ ZN6/ZC6
An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the…
- Downloads
- 184
- Likes
- 24
- Rating
- 0
P
PrintablesAD3D
FrSky X20S Gimbal Protector
I think these will fit the x20 (non S model) or the new X20 Pro as well. Let me know if they don't. This model prints upside down and does not require any supports, although I did find I got more reliable adhesion when I printed with a…
- Downloads
- 182
- Likes
- 5
- Rating
- 0
P
PrintablesSteve Perrier
FrSky TD SR10 Rx Tray
Designed to make the receiver and antennas a self contained unit to mount in an R/C plane, car, boat, or whatever you want. Assembles with (5) m2 socket head screws. Can be mounted using servo tape or extend screws through base and into…
- Downloads
- 179
- Likes
- 10
- Rating
- 0
P
Printablesrc-soar
Module bay cover for JR, FrSky X9D, Jumper T16 etc.
I made this to replace the broken cover on my X9D. It's based closely on the original moulding, but with a chamfer at the root of the catch to avoid stress risers and aid printing. It fits nicely on both the FrSky X9D amd Jumper T16. The…
- Downloads
- 172
- Likes
- 10
- Rating
- 0
P
Printablespetasto
FrSky TD MX Bracket
Snap-on bracket for mounting TD MX. Version for receivers with soldering pads and JST connector (v1.6) included. The connector version features a safety latch. Cable tie mount for 2.4G antennas :…
- Downloads
- 156
- Likes
- 5
- Rating
- 5
P
PrintablesFoothills Restoration Werks
2017 BRZ/FRS/86 Master Cylinder Pressure Cap
This is an adapter to enable an owner of a 2017 BRZ/FRS/86 sports car to be able to pressure bleed their brake system from the master cylinder. There are several pressure bleeder bottle kits available, or just use an air compressor with…
- Downloads
- 141
- Likes
- 15
- Rating
- 4
P
Printablesagibson2
FrSky X20 X20S Slider flipped
I modeled a replacement slider for the FrSky X20 and X20S RC transmitter that flips the long part of the slider to point down. This is more comfortable for me to use during flying. Be very careful trying to fit this on after printing. If…
- Downloads
- 139
- Likes
- 6
- Rating
- 0
P
PrintablesHalfManBear
BRZ GT86 FRS Single Cup Holder
Simple Single Cup holder (75mm diameter) for my 2016 Subaru BRZ
- Downloads
- 136
- Likes
- 26
- Rating
- 0
P
PrintablesJokoha
FRSKY Archer SR 8 PRO Receiver holder
Simple FRSKY Archer SR8 PRO receiver holder. Use a rubber band to secure the receiver.
- Downloads
- 134
- Likes
- 14
- Rating
- 5
P
PrintablesАнтон Наталюк
Artis3D KKm extruder FRS
KKM feeder with filament end sensor, printing parameters and how to connect with the printer, see the original authors https://www.printables.com/model/651002-k1-extruder-filament-runout-sensor
- Downloads
- 133
- Likes
- 27
- Rating
- 0
P
PrintablesHiRez99
Frsky X20(S) Gimbal & switches Protector PLUS
New design. For X20 & X20S Gimbal protector. It is also protecting the switches & potensiometer. Printed also in GLOW IN THE DARK PLA. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Filament:…
- Downloads
- 124
- Likes
- 6
- Rating
- 3
P
PrintablesD3D Pro
Frsky Taranis Q X7 Rotor Riot Gimbal Protector
Custom Rotor Riot themed gimbal/stick protectors for FrSky Taranis Q X7.
- Downloads
- 122
- Likes
- 8
- Rating
- 5
P
PrintablesJoeDoyle
GT86/BRZ/FRS Silhouette
This was my first attempt at creating a flat 3d model from a reference photo. It was printed in polymaker yellow PETG.
- Downloads
- 113
- Likes
- 10
- Rating
- 0
P
PrintablesSteve Perrier
FrSky Archer SR10+ Receiver Tray
Designed to make the receiver and antennas a self contained unit to mount in an R/C plane, car, boat, or whatever you want. Assembles with m2 socket head screws. Can be mounted using servo tape or extend screws through base and into…
- Downloads
- 110
- Likes
- 5
- Rating
- 0
P
PrintablesHiRez99
FRSKY Tandem X20(S) support / holder
Attached is support for the FRSKY TENDEM X20(S) transmitter. lder suitable for this model. So here is my desig for the support/holder. You can use a single leg or dual legs. Also my X10(S) Support :…
- Downloads
- 106
- Likes
- 11
- Rating
- 0
P
PrintablesxPakrikx
Small 3" speakers (Visaton FRS 8)
Small 3" speakers model (made from wood pla), Designed in hornresp for Visaton FRS 8 4 ohm driver. For best sound use self adhesive acoustic felt on walls and fill space with damping material also print with 40% and more infill. You can…
- Downloads
- 97
- Likes
- 13
- Rating
- 0
P
PrintablesPhilippe Herbots
pupitre émetteur Frsky X18
Pupitre élégant pour radiocommande X18 Frsky. Il se range dans la valisette molle avec l'émetteur. Il protège les manches "gimbals" de la radiocommande durant le transport dans la valisette. Les différentes pièces peuvent être plaquées…
- Downloads
- 94
- Likes
- 6
- Rating
- 0
P
PrintablesCrazyCool
Frsky Taranis X9D+ 18650 Battery Mod
I've now flown many hours with the stock x9d+ battery and it simply does not last long enough for my liking. I had a few spare 18650's (that I use for my goggles) and I figured they would make a great replacement for the stock battery of…
- Downloads
- 93
- Likes
- 13
- Rating
- 0
P
PrintablesPapaMike
Frsky Archer R6 casing
Frsky Archer R6 casing During the design of the casing, care was taken to ensure that an additional strain relief for the antennas could be realized. In addition, the housing should be as compact as possible. For mounting in the model…
- Downloads
- 90
- Likes
- 10
- Rating
- 0
P
Printablesflo_underscore
FrSky TWIN Antenna Mount for SAB Kraken 580
This is an antenna mount for a pair FrSky TWIN antennas. It is designed to be mounted on the back of the elevator servo (low-profile, full-size, not mini) of a SAB Kraken 580. The sleeve portion of the dipole antenna snaps in place and…
- Downloads
- 89
- Likes
- 5
- Rating
- 0
P
Printablesseansean
FrSky Tandem TDMX dual-band receiver Case (TD MX)
FrSky Tandem TDMX dual-band receiver Case (new version, not soldering required)
- Downloads
- 88
- Likes
- 3
- Rating
- 5
P
PrintablesEddi Maevski
Frsky Taranis X9D M9 Gimbal protectors
Frsky Taranis X9D M9 gimbal protectors There are few options here on Thingiverse...I've wanted better fit and wider opening to fit many custom stick ends (stick opening dia. 12.5 mm) Printed in PLA, infill 100%. M9 gimbals , highly…
- Downloads
- 84
- Likes
- 9
- Rating
- 5
P
PrintablesTimosch_28
Frsky r-xsr Receiver / FPV Antenna Mount
Mount for Frsky r-xsr Receiver and FPV video antenna. Works best with flexible filament. Print instructions Category: R/C Vehicles Summary Mount for Frsky r-xsr Receiver and FPV video antenna. Works best with flexible filament. Print…
- Downloads
- 80
- Likes
- 7
- Rating
- 5
P
Printablesifrah
Frsky TD MX mount
Frsky TD MX mount by slide receiver: https://s.click.aliexpress.com/e/_DnpZLtj
- Downloads
- 80
- Likes
- 1
- Rating
- 0
P
PrintablesRCFD
FrSky Taranis Q X7 Travel Case
A case for transporting my radio to and from flight locations and storing it at home. It has a locking tab at the bottom and a Velcro strap (25mm wide) up top to keep the lid secured. Also has loops for a carrying strap (Up to 25mm wide).…
- Downloads
- 80
- Likes
- 9
- Rating
- 0
P
Printablesrc-soar
Case for FrSky RX6R receiver
This is a minimalist case for the FrSky RX6R. Two versions are provided, one with access to the S-Port socket (as shown), and one without. The case fits receivers with PWM ports and bind button on the same side of the board (this is the…
- Downloads
- 79
- Likes
- 9
- Rating
- 5
P
PrintablesMS.3D.
Frsky S6R puzdro
Puzdro na RC modely lietadiel Frsky S6R Print instructions Značka tlačiarne: Prusa Tlačiareň: I3 MK3S Podpory: Ano Rozlíšenie: 0,20mm Výplň: 0% Perimetre: 2 Filament: PLA
- Downloads
- 76
- Likes
- 8
- Rating
- 0
P
PrintablesFoC_Tow
FrSky Taranis QX7 - Buttons and Dials
This is a drop in replacement for the original Taranis Q X7 Menu Buttons, Power Button and Dial. I printed these in neon yellow saintsmart TPU and after some tweaking of the model these fit and work absolutely perfect for me! Except for…
- Downloads
- 76
- Likes
- 7
- Rating
- 3.5
P
Printablesagibson2
Bigger back button for FrSky X20 and X20S
I like a bigger back momentary SI button on the X20S so I designed this. It replaces the plastic mechanism on the inside and has a screw on button top. For the internal part, Support should only be used on the flat area that is suspended…
- Downloads
- 70
- Likes
- 4
- Rating
- 0
P
PrintablesVlad Salad
Toyota 86 slim license plate holder/adaptor (BRZ/FRS?)
Adaptor to fit slimline license plates without overhang from the original cradle. Print 2, and mirror the second one Ideally printed in ABS at least 3 shells, 100% infill, oven annealed. Not sure if it fits BRZ/FRS but it is small enough…
- Downloads
- 69
- Likes
- 5
- Rating
- 0
P
Printablesmikeller
Gimbal protector for FrSky Taranis X9D with M9 gimbals
Print it yourself or order from Shapeways ! This gimbal protector has a larger size hole for the stick, to accommodate the stick of the M9 gimbal. Category: R/C Vehicles
- Downloads
- 68
- Likes
- 5
- Rating
- 4
P
PrintablesEuryphasic
Fog light blank/replacement - Toyota 86/Scion FRS/Subaru FRS ZN6/ZC6
My original fog lights had broken and I had been getting by covering them over with duct tape. I soon grew tired of the way they looked, and made this to test my improving CAD skills. I printed mine in ASA for UV resistance. There's a lot…
- Downloads
- 68
- Likes
- 12
- Rating
- 5
P
PrintablesCédric
Anti-roll bar link screw cover M12x1.25 (GT86/BRZ/FRS)
Screw cover to prevent the allen head from rusting away, need to grease it first. M12x1.25 designed for GT86/BRZ/FRS. Printed in PETG without supports.
- Downloads
- 67
- Likes
- 9
- Rating
- 0
P
Printablespeter.skotte
FrSky RX8R Mount - Flat
FrSky receiver mount - flat Category: Hobby
- Downloads
- 67
- Likes
- 5
- Rating
- 0
P
PrintablesPapaMike
Frsky Archer R10+ mount
For models with an gas engine, the lower holders can be printed in TPU to reduce the vibrations. For the assembly you need 2 carbon fiber tubes with od Ø4mm and 45mm length as well a screw with approx. 2,2mm diameter.
- Downloads
- 66
- Likes
- 4
- Rating
- 0
P
PrintablesRCNet
OMP M1 EVO Receiver Mount (FrSky Archer Plus RS Mini)
Introduction This mount is used for attaching a FrSky Archer Plus RS Mini receiver to the OMP Hobby M1 EVO radio-controlled helicopter. The mount replaces the lower carbon fiber “Frame Middle Plate” of the original model and adds an…
- Downloads
- 63
- Likes
- 7
- Rating
- 5
P
PrintablesMaudi29
radiomaster ranger nano back adapter for frsky x9 lite and other
radiomaster ranger nano back adapter for frsky x9 lite and other
- Downloads
- 62
- Likes
- 1
- Rating
- 0
P
Printablesssombra
Frsky X-lite Strap
This is just a remix of jessegyger's strap. The original model works great, it is a great job from the designer to make it such a good fit, but I wanted a simpler version so I removed some things like the hook that receives the cover, the…
- Downloads
- 61
- Likes
- 4
- Rating
- 0
P
Printablesrc-soar
Case for FrSky G-RX6 receiver
A quick-to-print case for the FrSky G-RX6. Provides proper protection. The signal pins for CH's 1 & 6 are marked with a small dot. Instructions: Print the two parts of the case Remove card wrapper from receiver, cut a piece 21 x 18 mm -…
- Downloads
- 60
- Likes
- 4
- Rating
- 0
P
PrintablesJo96
FRSky Taranis QX7 QX7s Gimbalschutz gimbal protector
Support auf Buildplate notwendig!
- Downloads
- 59
- Likes
- 1
- Rating
- 0
P
PrintablesLenny B FPV
Frsky X9D Taranis Lipo Hatch remixed
Tested and ok with 3s 2200mah Lipo TX power via balancer connector, Crossfire module via XT60/XT30 mods: closed the hole in the back/front larger cutout for powerwires for Crossfire Module print in PLA/ABS, works fine SUPPORT NEEDED…
- Downloads
- 56
- Likes
- 6
- Rating
- 0
P
Printablesagibson2
GImbal stick ends for FrSky Twin X-Lite
I needed longer stick ends than are provided with the Twin X-Lite S. I fly mainly gliders and wanted more throw on the stick ends. I also wanted the ends to not be uncomfortable to use for hours at a time. I don't need needles going into…
- Downloads
- 56
- Likes
- 4
- Rating
- 5
P
PrintablesHiRez99
FRSKY receiver protective case - ARCHER RS.
FRSKY receiver ARCHER RS protective case. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Filament: Tesla Filament PETG Category: Hobby
- Downloads
- 55
- Likes
- 7
- Rating
- 0
P
PrintablesRCNet
FrSky XM and XM Plus Receiver Cases
Cases for the FrSky XM and XM Plus receivers to provide a little more protection than the clear shrink-wrap that is installed from the factory. This is a simple two piece case which allows access to the BIND button and connections. I'm…
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
Printablesqczek
FrSky Taranis X9D (Plus) external antenna adapter
Hi, Using this adapter you can mount rp-sma pigtail and use any external antenna you want. There is no need to modify/cat/etc Taranis' case, just plug adapter instead of original antenna. Category: R/C Vehicles
- Downloads
- 55
- Likes
- 8
- Rating
- 0
P
PrintablesMattyT
DEWALT DXFRS800 Replacement Knob
Replacement knob for lost original
- Downloads
- 54
- Likes
- 2
- Rating
- 0
P
PrintablesRan
FrSKy - GR8 case
FrSky GR8+ receiver mounting. for screw or glue mounting for comfortable work, you can take it out and in easily without glu the receiver itself. I tested it on different models and hard situations. Print parameter: PLA/PETG 0.2 layer…
- Downloads
- 53
- Likes
- 0
- Rating
- 0
P
PrintablesHitLuca
FrSky Taranis X9D+ radio battery comprartment
Battery compartment cover that I modeled for my FrSky Taranis X9D+, since the model I remixed it from has sloppy tolerances and I thought I could do a better job. Keeps the original cover aesthetics, has a thumb grip for easy removal, and…
- Downloads
- 52
- Likes
- 7
- Rating
- 0
P
PrintablesNoah Stipe
Tein EDFC Mount for FRS GT86 BRZ
I designed this mount to hold the EDFC controller from tein. you will need 3 small screws to mount it to the dash. Designed to print with no supports. Slanted model angles the controller to be more level for the gyro. To install simply…
- Downloads
- 52
- Likes
- 8
- Rating
- 0
P
PrintablesEebel
FrSky X-20S Twisty Stick Protector
Fit the X-20 Series of FrSky Transimtters and protects the three-axis gimbals sticks. I printed it out of PETG with 20% infill, three perimeters and gyroid infill on a .6 nozzle. Should work with any transmitter with these types of sticks…
- Downloads
- 51
- Likes
- 9
- Rating
- 5
P
PrintablesDevin McGrath
FrSky X20s Extender
Spacer to improve the ergonomics of the FrSky X20S transmitter. I found that the position of the radio was uncomfortable and it weas unnecessarily short. This spacer makes the height more similar to my other radios. Printed in ABS on a…
- Downloads
- 48
- Likes
- 5
- Rating
- 5
P
PrintablesSubSite
USB compatible Table Stand for FrSKY Taranis X9D Plus
A table stand for Taranis X9D Plus. This stand has room for the USB cable when playing simulators. Easy to print without supports. Originally published in 2018: https://www.thingiverse.com/thing:2981532 Please post a Make if you make…
- Downloads
- 48
- Likes
- 8
- Rating
- 0
P
Printablesatomicalex
24 spline clutch tool for BRZ/FRS/86
Clutch discs have to be centered in the pressure plate when you mount up the clutchpack. This tool allows you to center your clutch disc easily by inserting it into the clutch disc, then inserting the tool nose into the flywheel bearing.…
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesAndy
BRZ/86/FRS steering rack limiter
Remove dust boot clamp, install at inner tierod end mount point, and remount boot. Do not use zip ties to secure boot, that will not work, I used these clamps. Size thickness as needed, default is 5mm. Used for when you need to avoid…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
PrintablesAnton
FrSky Receiver Mount
Receiver mount for 220 frame quadcopter.. connects underneath top plate to standoffs over the FC. For 3mm antenna tubes sold at hobbytown USA. This design clears the props and is under the top plate between camera and FC, which is a…
- Downloads
- 48
- Likes
- 2
- Rating
- 0
P
PrintablesNick Dollimount
BRZ/FRS/86 Custom Single Cup Holder
This is a custom single cup holder replacement for the OEM 2-cup holder for the Subaru BRZ, Scion FR-S and Toyota GT86. Print this in ABS so it can withstand the extra heat while parked outside in the sun. It's designed with a larger…
- Downloads
- 47
- Likes
- 7
- Rating
- 0
P
Printablesslvkmkr
Frsky taranis q X7s gimbal protector
It is a remix of taranis gimbal protector originally designed by ErgoFPV. https://www.thingiverse.com/thing:3191975
- Downloads
- 45
- Likes
- 7
- Rating
- 0
P
PrintablesRan
FrSky SR8+, mounting
FrSky SR8+ receiver mounting. for screw or glue mounting for comfortable work, you can take it out and in easily without glu the receiver itself. I tested it on different models and hard situations. Print parameter: PLA/PETG 0.2 layer…
- Downloads
- 44
- Likes
- 0
- Rating
- 0
P
PrintablesPhazeman
FrSky X20S AliExpress case inserts
I decided to upgrade the case for my FrSky X20S and ordered one from AliExpress - https://www.aliexpress.com/item/4000677757547.html (size: 330x235x170mm). The original insert fits right in but leaves a 3cm gap on the side so i designed…
- Downloads
- 44
- Likes
- 7
- Rating
- 0
P
Printablesjacob mccoy
FRS BRZ GT86 Rear Speaker Adapter
Just mirror model for the left side I don't know how no one has done this yet but here I am making it lol, has exact dimension as the OEM version making it fit perfectly in the OEM grill hole location I made mine out of PET-CF I recommend…
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
Printablesgaspain
FRSKY Taranis Q X7, FPV LCD monitor folding mount V1
This is a folding mount for the FRSKY Taranis Q X7 or QX7 S. This will allow you to mount a LCD monitor that has a screw mount on the bottom of the monitor. Included screw size is the standard 1/4"-20 that fits most tripod mount LCD…
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
PrintablesStratos
FrSky R9M 30mm Fan Mod Cover (ELRS)
A simple mix of the official ELRS cover and this one , to add a 30mm fan and mainly to keep the xt30 plug on the FrSky R9M 2019 module. Also changed the hex pattern a little bit.
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesRCNet
Frsky X12S "Eye of Horus" Roller Button
I didn't care for the factory roller button on the Frsky X12S Transmitter so decided to have a little fun designing/printing a replacement. Now my Horus has a proper eye. Print instructions Category: R/C Vehicles Print Settings Printer:…
- Downloads
- 40
- Likes
- 2
- Rating
- 0
P
Printablesдмитрий матин
KKM FRS исправленный
https://www.printables.com/model/950071-artis3d-kkm-extruder-frs исправлена эта модель! отверстие для шарика больше не глухое
- Downloads
- 39
- Likes
- 9
- Rating
- 0
P
PrintablesStasMan
KKM+FRS+ECAS04
KKM feeder with Filament Runout Sensor and ECAS04 fitting Just split, orient and arrange kkm-frs-for-print.stp To find out what new parts are needed, look at the full model in kkm-frs-with-components.stp Made for gears with a 4 mm bearing…
- Downloads
- 39
- Likes
- 7
- Rating
- 0
P
PrintablesSpace
FrSky X8R Receiver QAV250 Antenna holder
A Holder for the Antenna witch can be secured by shrink tubing. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Yes Category: R/C Vehicles
- Downloads
- 38
- Likes
- 4
- Rating
- 0
P
PrintablesWade Weppler
FrSky X20/X20S Gimbal Protectors
Created these protectors as I preferred the separated design compared to other protectors. I also use larger sticks so needed additional space for them to fit. Printed in PLA on an AnkerMake M5 .2mm layer, 2 walls, 15% infill. Print as…
- Downloads
- 37
- Likes
- 2
- Rating
- 0
P
PrintablesGiwi
FrSky X-Lite Module Bay Cover
3D-Printable replacement for the module bay cover Printed out of asa-cf
- Downloads
- 36
- Likes
- 0
- Rating
- 0
P
Printableschixxi
TBS Crossfire Micro Tx - Mount / Case for FrSky X-Lite
I am a big fan of the work from https://www.thingiverse.com/bgill142 . He came up with the absoluetly smallest possible case for the TBS Micro TX. However, his design is hard to print if you don't happen to have an SLA Printer. Also, I am…
- Downloads
- 34
- Likes
- 4
- Rating
- 0
P
PrintablesBrent
Frsky rx4r/rx6r Receiver Case
A must have to protect the receiver along with the week cardboard shell. Mine was a perfect fit so probably wont need size adjusting. Print Settings Supports: No Resolution: 02 Notes: Print antenna holes down Category: R/C Vehicles
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
Printablesdomlen
FrSky Taranis X-Lite Playstation-like Gimbal Stick Ends / Thumbsticks
These stick ends try to give you the gamepad thumb stick feeling as you know it from your Playstation or other console, while flying your quad. I found this model on Thingiverse but recreated it from scratch to optimize the printability.…
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
PrintablesDanneman
Frsky X-Lite Stickend
I wanted a simple and short stickend to my X-lite so i designed this. It only raise 2mm over the threaded shaft and has a little bowl at the top. The diameter is 10mm. I printed this in TPU to get a good grip, i can press it down the…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
Printables3dme_nl
RotorRiot gimbal protector for the FrSky x9d SE
I modified the gimbal protector to fit with the larger sticks. It also has a bigger cutout in the center to accomodate for a aftermarket balance bar. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
Printableswingsone
Battery cover for FrSky Taranis with 18650 cells
This can be used as a regular replacement battery cover with the advantage that it allows using two 18650 cells. Please see the project page for more information and updates:…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesOdevsa
FrSky Taranis X9D Plus Antenna (Reversible) Mod Adapter
I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to put old antenna back again, just pop off the adapter), but I found only a few large parts... Just print it and put some…
- Downloads
- 31
- Likes
- 3
- Rating
- 5
P
PrintablesTRE Di Print
FrSky X8R Support (antenna 90°)
Use Velcro or double-sided tape to secure the electrician's cable ties to the model and, if necessary, provide greater security. for the antennas fixed with heat-shrink material.
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesDomi
Frsky Archer Plus R6 Montagegehäuse
Frsky Archer Plus R6 Montagegehäuse.
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesStephen.Vieau
BRZ or FRS cookie cutter
It's really the BRZ cookie cutter because we all know it's better.
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
PrintablesDevin McGrath
FrSky X20R and X20RS Spacer
Spacer to improve the ergonomics of the FrSky X20R and X20RS transmitters. This is an adaptation of the one I made for the X20s to fit the newer style radios. I found that the position of the radio was uncomfortable and it was…
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesNighthawk
FrSky Switch Nut Wrench
Small wrench to tighten the switch nuts on FrSky Transmitters. Wire used is 0.03 music wire. I had to clean out the holes with a drill slightly smaller than the wire, then pressed them into the holes. For the print, I used 0.30 layer…
- Downloads
- 29
- Likes
- 4
- Rating
- 5
P
PrintablesM_Key
FrSky XM+ Holder 30mm bolt Pattern
FrSky XM+ Holder Für 30mm Befestigungsabstand Den Empfänger einfach von vorne einschieben und einrasten lassen ... ... For30mm bolt pattern Simply insert the receiver from the front and let it click into place Category: Electronics
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
Printablesfilch20049
FrSky Taranis X9 Lite Radiomaster Nomad Adapter
FrSky Taranis X9 Lite Radiomaster Nomad Adapter. Remix of: https://www.thingiverse.com/thing:6855518 Added V2 with more stable standoff if needed now with STEP
- Downloads
- 27
- Likes
- 3
- Rating
- 5
P
Printablesmikeller
FrSky XSR Holder
FrSky XSR mount. Fits between the 2 M3 standoffs at the back of the RCTimer argonaut hexacopter frame. Tray has been widened to accommodate the extra layer of heatshrink added after the addition of a pin for RSSI. Category: R/C Vehicles
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
Printablesvaxxi
FrSky XSR-M/XSR-E mount for 30.5 mm stack
The FrSky XSR-M/XSR-E mount is a reaaaallly tiny receiver (20x20 mm in size with 15x15 mounting), having 16 channels and telemetry. Since I couldn't find a suitable mount/adapter for it (in combination with my frame), here's this little…
- Downloads
- 27
- Likes
- 0
- Rating
- 0