1 / 6
Case for FrSky RX6R receiver
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a minimalist case for the FrSky RX6R. Two versions are provided, with/without access to the S-Port socket.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 80
- Makes
- 1
- Views
- 829
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a minimalist case for the FrSky RX6R. Two versions are provided, one with access to the S-Port socket (as shown), and one without.
The case fits receivers with PWM ports and bind button on the same side of the board (this is the most common arrangement).
Instructions:
- Remove the card wrapper from receiver, cut a piece 21 x 18 mm - this will be the new bed
- Print the case
- Lay the bed (from step 1) inside the bottom half
- Place the rx board over the bed
- Locate the top half and secure with tape or cyano
- Apply hot glue to the antennae exits
See screenshot for Cura slicer settings.
See also my case for the G-RX6.
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn't Matter
Supports:
No
Infill:
Use default (not critical)
Filament:
Category: Models