PS5 Dualsense Assymetric MOD

I made this mod for the Dualsense because my thumb hurts from the symmetric layout.

you need for this mod

Switch 2 TMR joystick (i use GuliKit) https://www.aliexpress.com/item/1005012185002509.html?spm=a2g0o.order_list.order_list_main.23.7c401802AHXgjY

4x Micro switch 4,5x4,5x4,8mm https://www.aliexpress.com/item/1005005816522606.html?spm=a2g0o.productlist.main.2.77b419Sz19Szwz&algo_pvid=02a734ed-0a7c-438f-a83d-7add3e24a7fc&algo_exp_id=02a734ed-0a7c-438f-a83d-7add3e24a7fc-1&pdp_ext_f=%7B%22order%22%3A%22567%22%2C%22eval%22%3A%221%22%2C%22fromPage%22%3A%22search%22%7D&pdp_npi=6%40dis%21HUF%21605.28%21602.04%21%21%211.87%211.86%21%400b884b5817856101222325376e1022%2112000034452282357%21sea%21HU%210%21ABX%211%210%21n_tag%3A-29910%3Bd%3A1729f2b4%3Bm03_new_user%3A-29895&curPageLogUid=hzIX53GBG0Xh&utparam-url=scene%3Asearch%7Cquery_from%3A%7Cx_object_id%3A1005005816522606%7C_p_origin_prod%3A

1x BSS84 transistor P-Mosfet

1x 10kΩ resistor

the transistor is needed for the joystick button because the switch 2 joystick button is switching gnd, and the dualsense is switching +1,8V, 

the transistor source pin go to the dualsense +1,8V, the gate pin is connected to the swwitch 2 button out, and drain pin goes to the dualsense switch output, and you need a 10kΩ resistor between the source and gate pins.

Print the shim with tpu this goes between the joystick and the button conductive film it supports the joystick and fix the wires on the conductive film.