1 / 6
USB Power Bank 6x18650 Cells
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used the PCB from an older, random power bank and adapted it to work with 6 18650 cells.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
There are lots of USB boards out there and it's very possible the one you have is different then mine. Therefore, I designed the "header" to be a different part which you can glue (or press fit as I did) to the cell cage. I've also attached the F3D model file.
You need 2x M3x8mm screws for closing the case and 2x M3x4-12mm for securing the PCB.
I printed it with PETG. No supports needed.