Case for Xiao NRF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a case that was easy to carry, with minimal mods to the board and with a power switch.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 16
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I love the Seeed Studio Xiao NRF boards. They are cheap and work well. I had originally made a different case but it was far less pretty and it only held a 500mah battery. This one makes for an awesome portable companion node. The only little tirck I do is cut a piece of the pink foam that comes with the board to put over the button in the case to keep it all in place.
Printing: Nothing fancy, I just use my standard settings for PETG, no brims, no supports.
Parts List:
Seeed Studio Xiao NRF version kit: XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic 868/915MHz LoRa
7mm x 7mm Push Button: 40Pcs Self-Locking Switch Push Button Swith Press On Off 6Pin Size 5.8x5.8mm 7x7mm 8X8mm 8.5x8.5mm
50x34x1 LiPo battery 2000mah: 103450 3.7V 2000mAh Li-Ion Battery with JST Plug
JST 2.0 female: not really necessary but I like to be able to disconnect the battery if need be so I solder thios in place and then add the battery.: 100pcs 2P JST PH 2.0 Plug 2.0mm Pitch 2 Pin Male and Female Housing Header Connectors Electric Cable Electrical Wire Connector - AliExpress
10cm sma pigtail (Could be shorter its just what I had): ALLiSHOP SMA Pigtail Jumper RP SMA Female to U.FL IPX RG178 1.13 Cable Sockets Jack Connectors Adapter for Wifi Router GPS AP - AliExpress
2 x M3x10mm CSK (countersunk) screws (12mm also works): M1.6 M2 M2.5 M3 M3.5 M4 M5 M6 M8 Stainless Steel Cross Recessed Pan/Countersunk Head Screw Phillips TV Computer Furniture Bolts - AliExpress
Optional: small piece of clear filament for the larger hole to show the flashing led.