1 / 3
A spool to dry Desiccant in containers in a filament dryer. — image 1
1 / 3

A spool to dry Desiccant in containers in a filament dryer.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keep desiccant dry without taking it out of the container, while drying other filament.

Rating
0 / 5
Likes
33
Downloads
46
Makes
0
Views
707
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE - Aug 9th, 2026

It really works ... I would not have thought it would work this well, but I took a load of fully black (or darkgreen, or whatever) desiccant, spread it over some containers (filled about half), and one cycle PETG (65 Celcius, 8 hours) in my Sovol SH03. They are perfectly orange again.

Not as brightly orange as they once were, but still, very orange indeed.


A spool to dry Desiccant in containers in a filament dryer.

I based the spool parts on the Bambu spool because I like the interlock mechanism. I used screw-in spools in the past, they work too, but for this project I went with this.

The spool models come from here: https://wiki.bambulab.com/en/knowledge-sharing/bambu-reusable-spool, but, to be honest, I used a copy I had on my storage, so it might as well have been this one; https://www.printables.com/model/251457-bambu-lab-reusable-spool-holder-hex-remix

The rest of the model is my own design, and I created it specifically for this desiccant holder;

Now, is this a good idea?

[Aug 9] Answer; yes! ;)

Well, I don't know. I have dried 7 canisters with it, seems to be working fine. Took 24 hours (drying desiccant at low temp is slow).

[Aug 9] And thats because this was at 45c, that's just not enough.

Tags