1 / 3
A spool to dry Desiccant in containers in a filament dryer. — zdjęcie 1
1 / 3

A spool to dry Desiccant in containers in a filament dryer.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keep desiccant dry without taking it out of the container, while drying other filament.

Ocena
0 / 5
Polubienia
33
Pobrania
47
Wydruki
0
Wyświetlenia
710
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE - Aug 9th, 2026

It really works ... I would not have thought it would work this well, but I took a load of fully black (or darkgreen, or whatever) desiccant, spread it over some containers (filled about half), and one cycle PETG (65 Celcius, 8 hours) in my Sovol SH03. They are perfectly orange again.

Not as brightly orange as they once were, but still, very orange indeed.


A spool to dry Desiccant in containers in a filament dryer.

I based the spool parts on the Bambu spool because I like the interlock mechanism. I used screw-in spools in the past, they work too, but for this project I went with this.

The spool models come from here: https://wiki.bambulab.com/en/knowledge-sharing/bambu-reusable-spool, but, to be honest, I used a copy I had on my storage, so it might as well have been this one; https://www.printables.com/model/251457-bambu-lab-reusable-spool-holder-hex-remix

The rest of the model is my own design, and I created it specifically for this desiccant holder;

Now, is this a good idea?

[Aug 9] Answer; yes! ;)

Well, I don't know. I have dried 7 canisters with it, seems to be working fine. Took 24 hours (drying desiccant at low temp is slow).

[Aug 9] And thats because this was at 45c, that's just not enough.

Tagi