HekLok M3 Screw Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for M3 screws and nuts to match the TekLok Chicago screw dimensions.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Designed for use with a domed M3 screw and a M3 nut, this will fit standard TekLok or Hek Lok belt clips and compatible accessories.
I recommend printing them with the large part of the head on the build plate, and they shouldn't need support. The nut should press in easily and hold securely, and the screw should pass through the center hole without effort. If you have some elephant foot and the screw is difficult to press through, you can use pliers to hold the head by the flats to thread in your screw.
Hardware needed:
1x M3 nut
1x Button head M3 screw, 8mm length minimum, but longer as needed