1 / 5
In-house Brita valve lever replacement (WHS-202) — image 1
1 / 5

In-house Brita valve lever replacement (WHS-202)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement for the top lever on the WHS-202 Brita Valve-In-Head system.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
16
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

tl,dr; use ABS and print a low-infill sample first to check that the socket fit works for you.

What is this thing?

This is a replacement part for the lever that sits on top of the housing for the WHS-202 Valve-In-Head Brita in-house filter system. The system is installed by splicing it into your plumbing line and provides filtered water to everything downstream. This lever controls whether the filtration system is in ON/OFF/BYPASS modes.

The original lever and plug are both plastic, this replacement is only for the socketed lever and not the plug. As far as I know it's impossible to find a replacement lever.

Compatibility

Guaranteed to fit WHS-202 Brita system.

Possibly may support white-labeled systems by other brands

  • EcoPure

  • DuPont

  • Whirlpool

  • Culligan

I am unsure of the comparable models from other brands, if you have one that this part works for, let me know and I will list it.

Printing

Only ABS worked for me, I had a lot of trouble printing this in PETG and PLA, but it may be do-able with extremely high infill density or other settings to improve socket rigidity.

ABS

The only material that worked for me. Modified settings to add socket wall strength:

  • Wall loops: 10

  • Space infill density: 50%

  • Space infill pattern: Hilbert Curve

this may be overboard and you may be able to get away with less.

PLA/PETG

The failure was not in the printing itself but in the socket strength. For PETG and PLA prints, the socket would fail under the pressure of the plug when torquing the lever and the walls would collapse.

I tried 10 wall loops and 80% infill density and they would still collapse, I think these plastics are just too soft. Though maybe 100% would work.

Socket Dimensions

The lever has a keyed square socket to match the plastic plug on the head of the filter system.

Main square socket: 9.32mm x 9.49mm
Notch: 2.75mm x 1.73mm

The 2.75mm side of the notch is adjoined to the 9.32mm side of the main square socket, at their midpoints.

The tolerances are very tight to my system. If it's too tight/loose for you, I would first try scaling up or down the print by 1% or less.

If all else fails, you will have to open up a CAD program to edit the attached STEP or FCSTD file socket dimensions to match your plug. I used FreeCAD, where you can edit the dimensions by editing the constraints on the 'sketch' associated to the body, or edit faces manually from the STEP file.

Tags