0.965 inch telescope eyepiece cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is not as much a remix as a repair of the original which was not correctly oriented and broken. This eyepiece cap…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 36
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
This is not as much a remix as a repair of the original which was not correctly oriented and broken.
This eyepiece cap is for the telescope itself. It slips-in the focusing mount of any telescope that uses the 0.96 inch standard.
It can be printed without any support.
For bed adhesion, I used a brim; but if your print bed is very sticky it might not even be necessary.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
Standard 0.2
Infill:
10% Cubic
Filament: CCTree PLA Fluorescent Red
Category: Sport & Outdoors