0.965 inch telescope eyepiece cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is not as much a remix as a repair of the original which was not correctly oriented and broken. This eyepiece cap…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is not as much a remix as a repair of the original which was not correctly oriented and broken.
This eyepiece cap is for the telescope itself. It slips-in the focusing mount of any telescope that uses the 0.96 inch standard.
It can be printed without any support.
For bed adhesion, I used a brim; but if your print bed is very sticky it might not even be necessary.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
Standard 0.2
Infill:
10% Cubic
Filament: CCTree PLA Fluorescent Red
Category: Sport & Outdoors