1 / 1
Sonoff NSPanel Pro 120 – Feller EDIZIOdue Wall Adapter - Captive Nut — image 1

Sonoff NSPanel Pro 120 – Feller EDIZIOdue Wall Adapter - Captive Nut

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sonoff NSPanel Pro 120 for Swiss 68mm UP-Dose, Feller EDIZIOdue mount. Arc slots with 45° chamfer & captive nut.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Sonoff NSPanel Pro 120 – Feller EDIZIOdue Wall Adapter

Captive Nut Version

Identical to the Open Nut Pockets version but with fully enclosed captive nut pockets – the M4 nuts are inserted during printing and permanently captured. No glue, no fiddling after printing.

What's Different to the Open Nut Pockets Version

  • Nut pockets are fully enclosed (1mm floor + 3.1mm cavity + 2.5mm ceiling)

  • Total height unchanged: 6.6mm

  • Slicer pause required at Layer 20 (Z=4.1mm)

Print Instructions

  1. Set a pause at Layer 20 (Z=4.1mm) in your slicer

  2. When the printer pauses, insert 2× M4 hex nuts using tweezers

  3. Make sure nuts sit flush in the pockets

  4. Resume print – nuts are permanently captured

Hardware Required

  • 2× M4 hex nut (AF 6.9mm, height 3.1mm)

  • 2× M4 screw

  • 4× Feller EDIZIOdue flat-head screws

Based on

Remix of Sonoff NSPanel Pro 120 UP-Adapter

Designed with AI assistance – Claude by Anthropic

Print Settings:

  • Layer height: 0.2mm

  • Infill: 15% Gyroid

  • No supports needed

  • Pause at Layer 20 (Z=4.1mm) for nut insertion

  • Tested on Bambu Lab P1S

Tags