1 / 4
Wiring covers for an Altivar 320 book format inverter — image 1
1 / 4

Wiring covers for an Altivar 320 book format inverter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bought an used Altivar, the wiring covers were missing, so here you go :)

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
10
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

These are simple covers to make the wiring of the inverter touch safe.

Both covers have a body part and the cover part.

Using the top cover:

Insert the hooks on the body part in the two holes, be careful not to break them; they are fragile (and not really needed). Lay the body part over the contacts. Fix the body part to the inverter with an M4 screw to the grounding metal part. Now wire the supply cable; the ground goes to the remaining hole in the metal part. Insert a cable tie into the loop on the body to fix the cable. Use a drop of superglue to fix the cover to the body.

Using the bottom cover:

Wire the motor cable first and connect the ground to the leftmost hole in the metal part. Orient the lug so it points to the left. Fix the body over the connector and fix it to the two remaining holes in the metal grounding part. Now use a cable tie to fix the motor cable to the bottom T-shaped part, so it is safely held in place. Then wire the cable for the electronic signals and use a cable tie in the loop on the cover to fix the cable to the cover. Apply some superglue to top rim of the body part and fix the cover with the cable to it.

Printing instructions:

Print all the parts in self-extinguishing PETG, ABS, or ASA so they will not soften at 60 °C.

The top cover body needs a lot of supports, sorry, couldn't be helped, the inverter geometry is to blame. Place both parts as prepared in the 3mf file. Choose the Support on build plate only option so the cable tie loop doesn't get filled. See pictures for guidance.

Bottom cover body needs just a bit of support; choose the Support everywhere option. See pictures for guidance.

Tags