Miata Gauge Panel V3 + V4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
right now i am in the process of turboing my 1996 Mazda miata and i couldn't seem to find a good way to mount the…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 118
- Makes
- 0
- Views
- 1,170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
right now i am in the process of turboing my 1996 Mazda miata and i couldn't seem to find a good way to mount the boost gauge and AFR gauge so i removed the little cubby under the radio and made this to fit in there! hope someone else can get some use of this i know i will!
I used Brass #8 x 3/4 in. Wood Screws to hold mine in and it worked great!
Print Settings
Printer Brand:
RepRap
Printer:
Duplicator i3 V2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Custom Section
update Log:
V2:
the holes are cut out for 2" gauges however when i designed it i made the holes exactly 2" so it was extremely snug i re-uploaded the files and made the holes slightly bigger! if you are going to print this make sure you download the most recent STL File!
V3:
-made the hole for the screw head larger
-made holes a little bigger to work with all gauges(some are larger than 2")
-Added cut outs on the back for the bracket that holds the gauge in place.
V4: added holes for 20mm toggle buttons (see pictures)
Category: Automotive