Garmin Xero Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case designed for the Garmin Xero chronograph.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case designed for the Garmin Xero chronograph. The case is sized generously so the protective bumper for the Xero, designed by SDK_3DS on Makerworld, may be used. For a firm cushioned fit, bumper or no, I recommend adhesive close celled weather-stripping. Thickness and width to be determined by your preference. The case hinges use M3x25 screws and nuts. The front fastener is simply a piece of 3mm (1/8") heavy stretch round string elastic cord. This is looped through the eyes of the lower-case body and passed though the cord tie, then knotted as you would a length of thread for hand sewing. To facilitate tying the knot, I recommend you use a piece of cord about 13 inches long. There is a 3mf file for Bambu Labs printers included.
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu P2S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.20
Infill:
30
Filament: Creality PETG Red
Notes:
4 walls. The cord tie is best printed in upright position.
Category: Sport & Outdoors