1 / 4
Hoyt 5 inch Tire, Pulley and Hub Set — image 1
1 / 4

Hoyt 5 inch Tire, Pulley and Hub Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wheel hub and pulley for Hoyt St 5inch Tires.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a custom hub and pulley designed to fit the Hoyt ST 5" tires for riders who can't find or don't want to buy the original Hoyt hardware. The original kit was north of $400 for the aluminum pulley and hub set.

My experience

  • I'm a 190 lb rider and put about 10 miles on these using a Wowgo AT2+.

  • The white finish looks great, and being pneumatic they soak up bumps as expected.

  • Great for carving on a DKP setup.

  • They do look a bit narrow on the board and I wish they were wider, but they perform great.

Materials

  • Hub: printed in Siraya Tech Fibreheart ABS-GF (white, glass-fiber reinforced ABS) for strength and heat resistance. After printing, I sanded the hub and coated it in epoxy to lock in the white color, add strength, and give the inner tube a smooth surface to rest against.

  • Pulley: printed in Elegoo ASA.

Hardware

  • The hub and pulley require 50mm and 35mm screws for installation. I used this kit from Amazon.

  • I'd suggest M3 lock nuts to keep the bolts from working themselves free.

Print settings

  • 0.4mm nozzle, "strength" profile

  • 5 wall loops

  • 5 top shell / 3 bottom shell layers, 100% top/bottom density

  • 40% sparse infill, gyroid pattern, 3x fill multiline

  • Supports required, printed with support ironing for a cleaner finish

Disclaimer

I am not an engineer, and this model has not been fully vetted or tested by a professional testing organization. This is a hobby item, and any injury or damages are not my responsibility. Print and use at your own risk.

Tags