Distanzrahmen für Chitu H2 in Flashforge AD5M - Spacer Frame for Chitu H2 in Flashforge AD5M
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ein Rahmen für die Positionierung des Chitu H2 mit der AD5M-Grundplatte - A mounting frame for the Chitu H2 with the AD5
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Passend zu meinem Remix mount for Chitu H2 in Flashforge AD5M
von dieser Grundplatte Chitu H2 mount for Flashforge Adventurer 5M
für die Chitu H2 Heizung, habe ich einen Rahmen erstellt, der die Heizung zur Scheibe auf 2,5 mm Abstand hält. Damit kann auch dieser Ventilator die Kammerluft einsaugen. Sonst würde der Ventilator die flexible Acrylscheibe ansaugen und abgedichtet werden.
Gleichzeitig sorgt die Kontur auf der Druckbettseite dafür, daß bei Schieflage das Druckbett nicht auf der Heizung aufsetzen kann.
Es sollte aus ABS / ASA oder ähnlich wärmestabilem Filament gedruckt werden.
0,2 Schichthöhe, 0,4 Düse
To go with my remix (above) of the base plate (above) for the Chitu H2 heater, I created a frame that keeps the heater 2.5 mm away from the acrylic sheet. This allows the fan to draw in air from the chamber as well. Otherwise, the fan would suck the flexible acrylic sheet in and create a seal.
At the same time, the contour on the print bed side ensures that the print bed cannot rest on the heater if it becomes tilted.
It should be printed using ABS, ASA, or a similarly heat-stable filament.
0.2 layer height, 0.4 nozzle