Non planar 3D printing test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I stumbled across a video on non planar 3D printing and then created my own with a guide to trying out the amazing…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 135
- Makes
- 1
- Views
- 1,405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I stumbled across a video on non planar 3D printing and then created my own with a guide to trying out the amazing work of Daniel Ahlers: https://youtu.be/gmePlcU0TRw
Included here is the Slic3r profile, STL and gcode.
Gcode updated with the correct nozzle and bed heating gcode. The print shouldn't start anymore until both are up to temp. Also added a lift to Z 20mm before the homing in the end gcode.
Warning! Please only print the gcode if you have removed all fan ducts and probes as shown in the video. Failure to do so will cause your print head to collide with the printed part. You cannot simply remove all of the fans, a fan must remain on the heat sink to prevent clogs.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Filament:
X3D PLA
Notes:
This should print on any printer with a bed of at least 200x200 and the mods to the print head shown in the video. Temps are 190 for the nozzle and 60 for the bed. I have removed my purge line from the start of the print for those with bed clips. Retraction is set to only 1mm due to my direct drive extruder but this object should not really create stringing anyways.
Category: 3D Printing