Yoopai Box Silica Container and Label Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silica Container and Label Holder for the Yoopai Filament Storage Boxes
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original silica box didn't have tabs as it was intended for cereal boxes. I simply added the tabs and some spacing so it locks in place on the tabs inside the Yoopai box. I also used to Yoopai tag as the tab and left the indentation so you can easily remove it when you need to change the silica.
In addition I took the Yoopai tag and modified that as well. As the original was printed with the filament type, etc. I thought that a bit limiting so I extended it and added ridges so that you can write what you want on some card, such as SunLu PLA+ Blue and insert it into the label holder rather than just a the material type printed on the card.
I did have one issue. I'm new to 3D printing. On the extended tag I had a slight ramp that when sliced it came out as steps and the back indentation looks crap. I used OrcaSlicer for the slicing and I couldn't get variable adaptive layer height to smooth it out completely. It doesn't make any difference to functionality and you can't really see it in the box but it is annoying me. If anyone fixes it can they let me know how. I'd love to learn.
To print I used support on the silica container due to the tabs protruding down. I blocked everything else and left them at the default settings. This was saved in the 3mf file if you can read it.
I put them all in one .3MF because when I get a new box I just print off the lot but if you only need bits of it you can just delete the rest in your slicer.