Counting matching models…
My kit didn't include these, I guess they were lost in shipping. So I made a model for them and now you have it too. You're welcome. Print on the only flat spot in the corner with a brim as shown in the image, no supports needed,
This is a custom desiccant bin for the Yoopai filament storage box. The design uses a hexagonal mesh to maximize airflow and desiccant surface area while keeping the structure rigid. I printed mine in PLA, since the bin itself isn't…
it Uses 4 M4 screws with nut the effective diameter is 78 mm An 80 mm tube with metal band fits perfectly
A set of 3D printable tags to slide into the molded feature that holds the Hydrometer in place. This is based on the idea from Yoopai found here:…
just a duct for keeping the top zipper snugged up that allows air to escape when a blower is installed. this stops foreign debris (hair, dust ect..) from entering the enclosure. Printed in PLA 0.2, walls 5, supports 0, infill 0
This box fits the Yoopai dry boxes: https://www.amazon.com/dp/B0G6ZWQSVY Here are some instructions: Use PETG because it is a little more flexible and can be put in a filament dryer at a higher heat than PLA. put the bottom flat on the…
When I made the drybox I only had 608 bearings on hand, so I shrunk the diameter of the rollers to fit inside a 608 bearing.
I needed a filament spool holder that could accommodate 4 spools for my CoPrint KCM system. The feed should be vertical into the 4 KCM extruders. I purchased a Yoopai spool holder:…
======== OVERVIEW ======== There are two versions. The " Normal " version tightens counter-clockwise. This is so the pressure from the rotating spool doesn't loosen the end cap over time and potentially make it fall off. (At least when…
Eine Gridfinity Box für den YOOPAI PTFE-Tube Cutter. Es wird kein AMS benötigt - das Inlay kann separat gedruck werden
I made this as my first model in tinkercad to move the mount for my c920 camera. it was originally mounted to my Ender 3 Neo, but the mount kept slowly slumping over no matter how tight it was (probably due to heat?) I also was having…
I designed an extension for the Artillery Sidewinder X1 ventilation system to make it compatible with the Yoopai XL enclosure. The gap between the printer and the enclosure walls is approximately 15cm. Since the original design by…
With this blower, I only unzip about 4 inches of the top to allow heat to exhaust. Works great when using PLA and wanting to keep temps reasonable and keep dust / pet hair off your prints. When placed at the front top of the enclosure…
I bought the Yoopai enclosure for my printer, and then decided to buy the exhaust fan kit they offer. The hole on the side has no way other than tossing the fan into the enclosure to seal and still have it attached. I designed this simple…
This spacer fits the YOOPAI honeycomb with a diameter of 3/8. Spacer is desgined for 3mm material. Created using TinkerCAD.
I received a Yoopai enclosure for Christmas this year for my Prusa MK3 + MMU. Due to my desk layout, I needed a way you pass though the PTFE tubes for the MMU to allow for loading filament straight from my filament dehydrator. This design…
Custom made activated carbon filter for YOOPAI printer enclosure.
Silica Box für Yoopai Filament Boxen. Da ich keine passende Filament Box für die neuen Yoopai Boxen gefunden habe, habe ich versucht mit Tinkercad diese gute Box etwas zu ändern. Es sieht jetzt nicht mehr so schön aus, aber die Funktion…
Watch the accompanying video to learn more about the mod and see the installation process: Overview Tired of the Z-axis gantry swaying like a mast when printing at high speeds on your Ender 3 V3 SE or KE? If you installed the YOOPAI…
DIY Upgrade Kit for YOOPAI Filament Dryboxes This DIY upgrade enhances the original YOOPAI filament drybox with smoother filament feeding, improved moisture management, and a cleaner organization. Features: Dual-axis filament support for…
This is an end cap for the light brackets on the Yoopai enclosure LED bar. I found them to be a bit sharp and was concerned that they might start cutting through the cloth of the enclosure. These are very small parts. I printed with a .4…
This is a grommet for the YOOPAI enclosure. It turns the rubber cross-grommet into a plastic ring grommet. Note: you may need to resize to 80-90% to get a great fit. it's intended to be a very tight fit to maximize the size of the grommet…
