TRMLN shell for Seeed Studio XIAO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalistic shell for DIY TRMLN using Seeed Studio XIAO esp32 + driver and 7" display.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
The shell has thin walls and a magnetically attached front plate that can be swapped out to suit your mood. The whole shell prints without supports — see the screenshot for part placement on the bed.
Materials
4× M2×2.5×3 threaded inserts
4× M2×6 screws
12× D4×2 mm magnets
Double-sided tape
Before printing, in the slicer
Measure your battery's height and scale trmnl_c along the Z axis so the battery fits, if it doesn't already. Also, make sure there's enough space between the battery and the part trmnl_c, so the part trmnl_skadis (or a wall screw head if you want to mount it this way) fits freely.
For trmnl_a and trmnl_b, add a pause to drop in the magnets. The exact layer number depends on your layer height, so check it against your own settings. Don't print these with a hardened ferromagnetic nozzle.
Make sure to add a skirt for the part trmnl_c for better stability
Assembly
Melt the 4 threaded inserts into the back of trmnl_a, at the marked positions.
Slide the screen into trmnl_a and feed the flat cable through the hole.
Solder the ESP32 to the screen driver.
Dry-fit trmnl_c onto the back of trmnl_a to find where the battery sits — it needs to end up fully covered by trmnl_c. Mark the spot.
Remove trmnl_c and glue the battery to the back of trmnl_a at that spot using double-sided tape.
Apply tape to the top edge of trmnl_c (the edge that meets the back of trmnl_a), then press the two parts together so the 4 screw holes line up.
Screw the display driver to trmnl_c through trmnl_spacer, then connect the flat cable, the battery, and the Wi-Fi antenna. Stick the antenna to trmnl_c.
